Toyana HM914545/10 tapered roller bearings
What are the dimensions 1.9375 in d of a Toyana HM914545/10 tapered roller bearings? Manufacturing Service . Get Your Free, 10.5000 in overall length: Instant Quote！
| d | 1.9375 in |
| base width: | 2.5625 in |
| overall length: | 10.5000 in |
| expansion type: | Non-Expansion Bearing (Fixed) |
| overall height: | 4.1250 in |
| finish/coating: | Uncoated |
| mounting: | Two-Bolt Base |
| B | 5.8750 in |
| bearing type: | Tapered Roller |
| seal type: | Felt Seal |
| bore type: | Round |
| lubrication type: | Lubrication Fitting |
| housing construction: | Split Pillow Block |
| operating temperature range: | Max 250° |
| base to bore centerline: | 2.8750 in |
| bolt size: | 0.6250 in |
| duty type: | Standard Duty |
| series: | DRPBA |
| housing material: | Cast Iron |
| standards met: | ABMA, ISO |
| locking device: | Set Screw |
| replacement bearing: | RCIA-115 |
| D | 6.75 to 8.5000 in |
| manufacturer catalog number: | 552273 |
Detailed Parameters
parameter：
Similar products
2LA-HSE909CG/GNP42 NTN 45x68x12mm Angle (α) 15 ° Angular contact ball bearings
Bearing number 2LA-HSE909CG/GNP42 Size (mm) 45x68x12 Brand NTN Bore Diameter (mm) 45 Outer Diameter (mm) 68 Width (mm) 12 d 45 mm D 68 mm B 12 mm C 12 mm Angle (α) 15 °
29324-E1 FAG T3 34 mm 120x210x54mm Thrust roller bearings
Bearing number 29324-E1 Size (mm) 120x210x54 Brand FAG Bore Diameter (mm) 120 Outer Diameter (mm) 210 Width (mm) 54 d 120 mm D 210 mm T 54 mm A 70 mm D1 154 mm Da max 182 mm Db min 213 mm d1 192.6 mm da min 165 mm db max 129 mm ra max
NTN FLRA168AZ deep groove ball bearings
NTN FLRA168AZ deep groove ball bearings Engineering Calculator , Manufacturing Service . 1.1875 in d Get Your Free. 5.8281 in B d 1.1875 in B 5.8281 in D 4.6094 in bearing material: 400 Stainless Steel seal type: Single Lip Contact bore type: Round end type: Sealed Closed Cap duty type: Standard Duty operating temperature range:
ESEHE209 SNR Weight 1.9 Kg Bearing units
A2 40 mm B 30.2 mm A5 19.2 mm d1 62 mm G R1/8″ L1 90 mm L3 45 mm s1 33.4 mm S 11 mm SW 4 mm C 31.85 kN C0 20.8 kN T min. -20 °C T max. 100 °C Recommended tightening torque for set screw 11.5 Nm Designation of housing EHE209-