Toyana 7005 C-UO angular contact ball bearings
With over 10170 full-service stores, our Toyana 7005 C-UO angular contact ball bearings inventory is extensive and our parts are priced right. within 24 hours. 50x95x37 Size (mm) This helps you maximize your productivity by saving time and your hard-earned dollars.
| Size (mm) | 50x95x37 |
| Bore Diameter (mm) | 50 |
| Outer Diameter (mm) | 95 |
| Width (mm) | 37 |
| d | 50 mm |
| D | 95 mm |
| T | 37 mm |
| b | 11 mm |
| d1 | 95 mm |
| r min. | 1,1 mm |
| A | 28 mm |
| D1 | 52 mm |
| D2 | 72 mm |
| D3 | 100 mm |
| R | 72 mm |
| da min. | 77 mm |
| Da max. | 68 mm |
| ra max. | 1 mm |
| Weight | 1,27 Kg |
| Basic dynamic load rating (C) | 97,5 kN |
| Basic static load rating (C0) | 202 kN |
| (Grease) Lubrication Speed | 1800 r/min |
| SRI | 8.57 |
| hidYobi | 53310U |
| LangID | 1 |
| D_ | 95 |
| SREX | 0.065 |
| C | 97.5 |
| B_ | 37 |
| hidTable | ecat_NSSDTB |
| Oil rpm | 2800 |
| SRE | 8.57 |
| mass | 1.27 |
| GRS rpm | 1800 |
| ra | 1 |
| SRIX | 0.065 |
| T4 | 37 |
| D_3 | 100 |
| D_a | 68 |
| SRIN | 0 |
| C0 | 202 |
| D_2 | 72 |
| SREN | 0 |
| D_1 | 52 |
| Prod_Type3 | TB_SD_WASW |
| da | 77 |
| DA_ | 15.875 |
| Z_ | 13 |
| yobi | 53310U |
| A_ | 28 |
| T3 | 34.3 |
| SDM_ | 72.5 |
| r | 1.1 |
| KBRG | 5131 |
| R_ | 72 |
Detailed Parameters
parameter：
Similar products
ILJIN IJ123052 angular contact ball bearings
Our highly-skilled and factory-trained service experts have the resources to help you with all your ILJIN IJ123052 angular contact ball bearings needs – including routine maintenance, major repairs, warranty service, and equipment inspections. 76.2×161.925×53.975 Size (mm) Size (mm) 76.2×161.925×53.975 Bore Diameter (mm) 76,2 Outer Diameter (mm) 161,925 Width (mm) 53,975 d 76,2 mm D 161,925
30VS3716AP-1 KOYO Basic dynamic load rating (C) 20.8 kN 30x37x16mm Needle roller bearings
Bearing number 30VS3716AP-1 Size (mm) 30x37x16 Brand KOYO Bore Diameter (mm) 30 Outer Diameter (mm) 37 Width (mm) 16 Fw 30 mm Ew 37 mm B 16 mm Lw 12.8 mm Weight 0.03 Kg Basic dynamic load rating (C) 20.8 kN
UP004 NACHI H2 9 mm Bearing units
Bearing number UP004 Brand NACHI Bore Diameter (mm) 20 Width (mm) 24.5 d 20 mm A 20 mm B 24.5 mm B1 55 mm H 28 mm H1 9 mm H2 9 mm J 80 mm L 100 mm N 10 mm S 6 mm Bolt (G) M 8
100TAD20 NACHI (Grease) Lubrication Speed 2800 r/min 100x150x60mm Thrust ball bearings
Bearing number 100TAD20 Size (mm) 100x150x60 Brand NACHI Bore Diameter (mm) 100 Outer Diameter (mm) 150 Width (mm) 60 d 100 mm D 150 mm T 60 mm ra1 max. 1 mm Angle (α) 60 ° d1 133 mm r min. 1.5 mm r1 min. 1 mm C 30 mm da min. 119 mm Da