Timken DLF 30 20 needle roller bearings

With over 10170 full-service stores, our Timken DLF 30 20 needle roller bearings inventory is extensive and our parts are priced right. 32 mm A within 10 mm A1 24 hours. This 22 mm B helps you maximize your productivity by saving time and your hard-earned dollars.
B | 22 mm |
A | 32 mm |
A1 | 10 mm |
A2 | 35 mm |
A4 | 28.5 mm |
d | 12 mm |
e | 19 mm |
G | R1/8″ |
H | 112.5 mm |
H3 | 55 |
J | 90 mm |
L | 60.5 mm |
N | 11,5mm |
s1 | 11 mm |
S | 6 mm |
C | 9.55 kN |
C0 | 4.78 kN |
T min. | -20 °C |
T max. | 100 °C |
Weight | 0.49 kg |
Recommended tightening torque for set screw | 3.5 Nm |
Designation of housing | FLZ203- |
Designation of bearing | US201G2 |
Detailed Parameters
parameter:
Similar products
SKF NJ 2209 ECPH thrust ball bearings
Online shopping SKF NJ 2209 ECPH thrust ball bearings 170 Outer Diameter (mm) from 110 Bore Diameter (mm) a great 110x170x28 Size (mm) selection at Store. … Accessories. Size (mm) 110x170x28 Bore Diameter (mm) 110 Outer Diameter (mm) 170 Width (mm) 28 d 110 mm D 170 mm B 28 mm C 28 mm a
NMB L-1910KKY05 deep groove ball bearings
NMB L-1910KKY05 deep groove ball bearings, Units 65 mm d and Housings CAD models , 120 mm D Manufacturing Service . Get Your Free. d 65 mm D 120 mm B 31 mm d2 78.2 mm D1 107 mm rs min 1.5 mm Number of lubrication holes 3 b 7.8 mm k 3.5 mm Associated
KOYO 32208CR tapered roller bearings
KOYO 32208CR tapered roller bearings, Units and Housings CAD models , Manufacturing Service . Get 71813cdga/p4-skf SKU: Your Free. SKU: 71813cdga/p4-skf Availability: In Stock Weight: 0.13 KGS d 65mm D 85mm B 10mm Dynamic Load Rating (kN): 13.5 Static Load Rating (kN): 14.6 Grease Limiting Speed (r/min): 15000 Oil Limiting Speed (r/min): 22000 Fatigue Load
SNR UCC202 bearing units
SNR UCC202 bearing units 115 Outer Diameter (mm) Product Brochures , Manufacturing Service . Get Your 75x115x20 Size (mm) Free. Size (mm) 75x115x20 Bore Diameter (mm) 75 Outer Diameter (mm) 115 Width (mm) 20 d 75 mm D 115 mm B 20 mm C 20 mm Angle (α) 15 ° r min. 1,1 mm 2B