Timken 9110PP deep groove ball bearings
With over 10170 full-service stores, our Timken 9110PP deep groove ball bearings inventory is extensive and our parts 3.0000 in d are priced right. within 24 hours. This helps you maximize your productivity by saving time 140 mm D and your hard-earned dollars.
| d | 3.0000 in |
| radial dynamic load capacity: | 13400 lb |
| D | 140 mm |
| radial static load capacity: | 11400 lb |
| outer ring width: | 1.6865 in |
| bearing material: | Cast Iron |
| inner ring width: | 3.2500 in |
| finish/coating: | Uncoated |
| bore type: | Round |
| maximum rpm: | 2700 RPM |
| locking device: | Set Screw Collar |
| seal type: | Contact/Lip |
| operating temperature range: | -40 to +225 °F |
| series: | ER |
Detailed Parameters
parameter：
Similar products
Timken K45X50X17H needle roller bearings
With over 10170 full-service stores, our Timken K45X50X17H needle roller bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity 0.0 Inventory by saving time and N/A Minimum Buy Quantity your hard-earned NSK Manufacturer Name dollars. Inventory 0.0 Manufacturer Name NSK Minimum Buy Quantity N/A Weight
FAG HCS71901-C-T-P4S angular contact ball bearings
With over 10170 full-service N/A Minimum Buy Quantity stores, our FAG HCS71901-C-T-P4S angular contact ball bearings inventory is extensive and our parts are 0.0 Inventory priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. Inventory 0.0 Manufacturer Name PEER BEARING CO. Minimum Buy Quantity N/A Weight
Toyana CRF-32028 A wheel bearings
Enjoy High Margins on Competitive Pricing.Great Wholesale 17 mm d Products at Low Costs. d 17 mm D 47 mm B 14 mm rs min 1 mm Radial clearance class CN Mass 0.12 kg Dynamic load, C 13.5 kN Static load, C0 6.55 kN Fatigue limit load, Cu 0.3 kN f0 12.2 Nlim (grease) 16,000
LMFP12L Samick Tolerance perpendicularity (C) 15 Linear bearings
Bearing number LMFP12L Brand Samick Bore Diameter (mm) 12 Outer Diameter (mm) 21 d 12 mm D 21 mm d1 4.5 mm d2 8 mm h 4.4 mm D1 42 mm H 6 mm L 57 mm PCD 32 mm ℓ 6 Tolerance h14 Tolerance perpendicularity (C) 15 Weight 0.1 Kg Basic dynamic load rating