Timken 28580/28523 tapered roller bearings
With over 10 Bore Diameter (mm) 10170 full-service stores, our Timken 28580/28523 tapered roller bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your 10 Width (mm) hard-earned dollars.
| Bore Diameter (mm) | 10 |
| Width (mm) | 10 |
| d | 10 mm |
| P | 19 mm |
| B | 10 mm |
| C | 6,5 mm |
| D | 28 mm |
| F | 43 mm |
| H | 10,5 mm |
| L | 20 mm |
| N | 15 mm |
| S | 17 mm |
| W | 14 mm |
| Angle | 8 ° |
| Thread (TH) | M10×1,5 |
| Weight | 72 Kg |
| Basic dynamic load rating (C) | 4,45 kN |
Detailed Parameters
parameter：
Similar products
B-710 KOYO 11.113×15.875×15.88mm Bore 0.438 Inch | 11.125 Millimeter Needle roller bearings
Category Needle Non Thrust Roller Bearings BDI Inventory 19.0 Manufacturer Name KOYO Minimum Buy Quantity N/A Weight / Kilogram 0.01 EAN 0605790198151 Product Group – BDI B04144 Rolling Element Needle Roller Bearing Component Roller Assembly with Outer Ring – No Inner Ring Enclosure Open Self Aligning No Retainer No Number of Rows of Rollers Single
FAG KLM29749-LM29710 tapered roller bearings
FAG KLM29749-LM29710 tapered roller bearings, Units and Housings CAD models , HM88500 Series Manufacturing Service . Get Your Free. Series HM88500 Cup Part Number HM88511 Design Units Imperial D 2.8750 in C – Cup Width 0.9063 in r – Cup Backface To Clear Radius1 0.030 in Da – Cup Frontface Backing Diameter 2.80 in Db
LMEKP20L Samick ℓ 8 Tolerance h14 Linear bearings
Bearing number LMEKP20L Brand Samick Bore Diameter (mm) 20 Outer Diameter (mm) 32 d 20 mm D 32 mm d1 5.5 mm d2 9.5 mm h 5.4 mm D1 54 mm H 8 mm K 42 mm L 80 mm PCD 43 mm ℓ 8 Tolerance h14 Tolerance perpendicularity (C) 17 Weight 0.26 Kg Basic
150TAC29D+L NSK 150x210x72mm Basic dynamic load rating (C) 116 kN Thrust ball bearings
Bearing number 150TAC29D+L Size (mm) 150x210x72 Brand NSK Bore Diameter (mm) 150 Outer Diameter (mm) 210 Width (mm) 72 d 150 mm D 210 mm T 72 mm C 36 mm Angle (α) 60 ° r min. 2 mm r1 min. 1 mm Da 200 mm ra max. 2 mm rb max. 1 mm da