Slewing Ring Bearings for Wind Turbine Carbon Steel Seamless Rolled Steel Forging Rings
The online Slewing Ring Bearings for Wind Turbine Carbon Steel Seamless Rolled Steel Forging Rings parts store gives you Two-Bolt Base mounting: immediate access to a selection of Uncoated finish/coating: more than 1.4 million 2.0000 in d new, used, remanufactured.
| mounting: | Two-Bolt Base |
| finish/coating: | Uncoated |
| d | 2.0000 in |
| B | 2.2500 in |
| bore type: | Round |
| operating temperature range: | Max 250° |
| base to bore centerline: | 2.5000 in |
| base width: | 2.3750 in |
| duty type: | Normal Duty |
| D | 6.5000 to 7.0000 in |
| housing material: | Stainless Steel |
| bolt size: | .6250 in |
| locking device: | Skwezloc |
| lubrication type: | Lubrication Fitting |
| seal type: | Contact/Lip |
| series: | NP |
| expansion type: | Non-Expansion Bearing (Fixed) |
| replacement bearing: | 2-2TC FG2 |
| overall length: | 8.6250 in |
| manufacturer catalog number: | 723610 |
| overall height: | 5.0000 in |
Detailed Parameters
parameter：
Similar products
Timken AX 45 65 needle roller bearings
Various types and sizes 3.6250 in D to accommodate 1.3750 in d your Timken AX 45 65 needle roller bearings requirements. Contact with Flinger seal type: d 1.3750 in seal type: Contact with Flinger D 3.6250 in length through bore: 1-27/32 in B 4.6250 in operating temperature range: Maximum of +225 °F bore type: Round
150BAR10S NSK 150x225x33.75mm (Oil) Lubrication Speed 5 100 r/min Angular contact ball bearings
Bearing number 150BAR10S Size (mm) 150x225x33.75 Brand NSK Bore Diameter (mm) 150 Outer Diameter (mm) 225 Width (mm) 33.75 d 150 mm D 225 mm B 33.75 mm C 33.75 mm Angle (α) 40 ° a 71 mm r min. 2.1 mm r1 min. 1.1 mm 2B 67.5 mm Weight 4.354 Kg Basic dynamic load
NBS KBH 06-PP linear bearings
Advance NBS KBH 06-PP linear bearings is your source for quality and accessories. shop online for 35 mm A2 home delivery or pick up in 16 mm A1 one of 49 mm A our 10000 . A 49 mm A1 16 mm A2 35 mm B 30.2 mm A5 19.2 mm B1 43.7 mm d
EST204 SNR Bore Diameter 20mm Bearing units
A2 21 mm B 21.4 mm A5 13.9 mm d1 32.4 mm G M6x1 H2 51 mm N2 32 mm s1 24.2 mm S 7.5 mm SW 3 mm C 12.8 kN C0 6.65 kN T min. -20 °C T max. 100 °C Recommended tightening torque for set screw 5.5 Nm Designation of housing T204-