SKF P 80 R-1.1/4 TF bearing units
Various types and 16 Outer Diameter (mm) sizes to accommodate your 5x16x5 Size (mm) SKF P 80 R-1.1/4 TF bearing units requirements.
| Size (mm) | 5x16x5 |
| Bore Diameter (mm) | 5 |
| Outer Diameter (mm) | 16 |
| Width (mm) | 5 |
| Bearing Type | Flange Sealed |
| Bore Dia (d) | 5.0000 |
| Outer Dia (D) | 16.0000 |
| Width (B) | 5.0000 |
| Radius (min) (rs) | 0.300 |
| Flange Dia (Df) | 18.0000 |
| Flange Width (Bf) | 1.000 |
| Dynamic Load Rating (Cr) | 1,470 |
| Static Load Rating (Cor) | 540 |
| Max Speed (Grease) (X1000 RPM) | 36 |
| Max Speed (Oil) (X1000 RPM) | 43 |
| Max. Shaft Shoulder Dia. Inner (Ui) | 7.5 |
| Min. Housing Shoulder Dia., Outer (Uo) | 13.800 |
| Ball Qty | 7 |
| Ball Dia (Dw) | 2.7780 |
| Weight (g) | 5.52 |
| Precision | A1 |
| Standard Clearance | K25 |
| Material | Martensitic Stainless Steel |
Detailed Parameters
parameter：
Similar products
ESPAE207 SNR Thread (G) R1/8" Bearing units
Bearing number ESPAE207 Brand SNR Bore Diameter (mm) 35 d 35 mm s 9.5 mm A 45 mm A1 27 mm B1 38.9 mm D2 55.6 mm E 12.5 mm H 47.6 mm H1 12 mm H2 93 mm J 82.6 mm L 103 mm L1 22.5 mm Thread (G) R1/8" Thread (N1) M10 Weight
ISB 24092 K30 spherical roller bearings
With over 10170 full-service stores, our ISB 24092 K30 spherical roller bearings inventory is extensive and our parts are priced right. within 24 hours. 220x300x60 Size (mm) This helps you maximize your productivity by saving time and your hard-earned dollars. Size (mm) 220x300x60 Bore Diameter (mm) 220 Outer Diameter (mm) 300 Width (mm) 60 d
T128 Timken D 66.675 mm 32.004×66.675×18.654mm Thrust roller bearings
Bearing number T128 Size (mm) 32.004×66.675×18.654 Brand Timken Bore Diameter (mm) 32.004 Outer Diameter (mm) 66.675 Width (mm) 18.654 d 32.004 mm D 66.675 mm T 18.654 mm R 0.8 mm
SX011868 INA 340x420x38mm nG Fett 200 1/min / Limiting speed for grease lubrication with normal clearance Complex bearings
Bearing number SX011868 Size (mm) 340x420x38 Brand INA Bore Diameter (mm) 340 Outer Diameter (mm) 420 Width (mm) 38 di – 340 mm / Tolerance: K6 +0,007 / -0,029 340 mm / Tolerance: K6 +0.007 / 0.029 Da – 420 mm / Tolerance: h6 -0,040 420 mm / Tolerance: h6 0.040 H – 38 mm