NTN NA82576/82932D tapered roller bearings

How do I place an EMERGENCY order for a NTN NA82576/82932D tapered roller bearings that 12 ° misalignment angle: I want to pick up 0.5000 in d Bronze race material: at a our store?

d	0.5000 in
race material:	Bronze
misalignment angle:	12 °
radial static load capacity:	6 ,660 lbs
shank thread length:	1.500 in
lubrication:	Unlubricated
rod end type:	Male Threaded
head diameter:	1.312 in
shank thread size:	1/2- 20 in
head width:	0.500 in
thread direction:	Right Hand
ball width:	0.625 in
grade:	Commercial/Industrial
length to ball center:	2.438 in
lubrication type:	No Fitting
standards met:	SAEJ1120
housing material:	Carbon Steel – corrosion resistant plating
series:	VM
ball material:	52100 Bearing Steel

Detailed Parameters

parameter：

Similar products

INA PMEY30-N bearing units

100% Authentic. INA PMEY30-N bearing units 65 F Highest JR55x65x60 Bearing No. Quality. Certified Supplier. Bearing No. JR55x65x60 d 55 F 65 B 60 rs 1 (Refer.)Mass(kg) 0.444

How do you find the SKF VKBA 3470 wheel bearings 2 in d specification? Manufacturers Online Free check！ d 2 in cage material: No Cage D 2-3/8 in maximum rpm: 3300 RPM B 7/8 in precision rating: Not Rated drawn cup type: Open Ends with Full Complement series: B closure type: Open lubrication hole type:

207KDG Timken Outer Diameter 72mm 35x72x17mm Deep groove ball bearings

Bearing number 207KDG Size (mm) 35x72x17 Brand Timken Bore Diameter (mm) 35 Outer Diameter (mm) 72 Width (mm) 17 d 35 mm D 72 mm B 17 mm C 17 mm Weight 0.290 Kg Basic dynamic load rating (C) 29.1 kN

SCH208 INA 31.75×41.275×12.7mm Minimum Buy Quantity N/A Needle roller bearings

Bearing number SCH208 Size (mm) 31.75×41.275×12.7 Brand INA Bore Diameter (mm) 31.75 Outer Diameter (mm) 41.275 Width (mm) 12.7 Fw 1 1/4 inch Fw 31.75 mm D 1.625 inch D 41.275 mm C 0.5 inch C 12.7 mm m 0.079 lbs / Weight m 36 g / Weight Cr 3690 lbf / Dynamic load rating