NSK NU2218 ET cylindrical roller bearings
Welcome to the 55.6 mm B 43 mm A NSK NU2218 ET cylindrical roller bearings online seller.
| B | 55.6 mm |
| A | 43 mm |
| A1 | 18 mm |
| A2 | 58.4 mm |
| d | 53.98 mm |
| Dz | 110 mm |
| e | 25 mm |
| G | M6x1 |
| H | 224 mm |
| J | 184 mm |
| L | 130 mm |
| N | 19mm |
| s1 | 27.8 mm |
| S | 22.2 mm |
| Z | 64.3 mm |
| C | 43.55 kN |
| C0 | 29.2 kN |
| T min. | -20 °C |
| T max. | 100 °C |
| Weight | 3.08 kg |
| Recommended tightening torque for set screw | 16.8 Nm |
| Designation of housing | FL211N- |
| Designation of bearing | UC211-34G2L3 |
| Designation of open end cover | SCOU211-34 |
Detailed Parameters
parameter：
Similar products
51111 NKE r2 min. 0.6 mm 55x78x16mm Thrust ball bearings
Bearing number 51111 Size (mm) 55x78x16 Brand NKE Bore Diameter (mm) 55 Outer Diameter (mm) 78 Width (mm) 16 d 55 mm D 78 mm H 16 mm d1 78 mm r1 min. 0.6 mm r2 min. 0.6 mm D1 57 mm Weight 0.25 Kg Basic dynamic load rating (C) 31 kN Basic static load
NSK MFJL-3020L needle roller bearings
We Provide Extensive NSK MFJL-3020L needle roller bearings Selection 0.8750 in d And Competitive 1.3750 in inner ring width: Wholesale 2.7500 in D Pricing. d 0.8750 in inner ring width: 1.3750 in D 2.7500 in bearing material: 52100 Steel/Black Oxide B 3.7500 in seal type: Contact Seal bore type: Round length through bore: 1.3750 in
Slewing Bearing Ring Non Gear 90-20 0411/0-07012
What is the 150 mm Shaft Size best place to buy Slewing Bearing Ring Non Gear 90-20 0411/0-07012 online? Manufacturing Service . High Temperature Packing Seal Type Shaft Size 150 mm Seal Type High Temperature Packing Bearing Type Split Cylindrical Retained Type Support Type Take-Up Series Type Light Series Tensioning Unit Type Tension Type Bearing
Timken 95500/95925B tapered roller bearings
Online shopping 24 in travel: Timken 95500/95925B tapered roller bearings from a Slide Tube frame type: great selection at Store. … Accessories. travel: 24 in mounting plate width: 3 in frame type: Slide Tube rod diameter: 1 in mounting plate bolt hole center (max): 8-11/16 in ppi bearing series to suit: SCM 1-15/16 to 1-13/16