NSK 7215CTRSU angular contact ball bearings
LET 2500 Series OUR NSK 7215CTRSU angular contact ball bearings EXPERTS GET YOU THE 2520A Cup Part Number PARTS YOU NEED. 2580A Cone Part Number
| Series | 2500 |
| Cone Part Number | 2580A |
| Cup Part Number | 2520A |
| Design Units | Imperial |
| Bearing Weight | 0.4 Kg |
| Cage Type | Stamped Steel |
| d | 31.750 mm |
| D | 66.421 mm |
| B – Cone Width | 25.357 mm |
| C – Cup Width | 20.638 mm |
| B | 25.400 mm |
| R – Cone Backface To Clear Radius1 | 1.270 mm |
| r – Cup Backface To Clear Radius2 | 1.52 mm |
| da – Cone Frontface Backing Diameter | 39.62 mm |
| db – Cone Backface Backing Diameter | 41.40 mm |
| Da – Cup Frontface Backing Diameter | 62.00 mm |
| Db – Cup Backface Backing Diameter | 58.93 mm |
| Ab – Cage-Cone Frontface Clearance | 1.5 mm |
| Aa – Cage-Cone Backface Clearance | 0.5 mm |
| a – Effective Center Location3 | -8.6 mm |
| C90 – Dynamic Radial Rating (90 million revolutions)4 | 4880 lbf |
| C1 – Dynamic Radial Rating (1 million revolutions)5 | 18800 lbf |
| C0 – Static Radial Rating | 21200 lbf |
| Ca90 – Dynamic Thrust Rating (90 million revolutions)6 | 2280 lbf |
| K – Factor7 | 2.14 |
| e – ISO Factor8 | 0.27 |
| Y – ISO Factor9 | 2.19 |
| G1 – Heat Generation Factor (Roller-Raceway) | 23.6 |
| G2 – Heat Generation Factor (Rib-Roller End) | 9.63 |
| Cg – Geometry Factor | 0.0656 |
Detailed Parameters
parameter：
Similar products
SI10E AST Body End Dia. (d4) 19.000 Plain bearings
Bearing number SI10E Brand AST Bore Diameter (mm) 10 Width (mm) 9 Bearing Type – steel-on-steel steelonsteel Bore Dia (d) 10.0000 Width (B) 9.0000 Radius (min) (rs) 0.300 Dynamic Load Rating (Cr) 8.100 Static Load Rating (Cor) 17.600 Spherical Diameter (dk or Dk) 16.000 Mis-alignment Angle (a deg.) 12 Thread Length (l1) 20.000 Bore Center
USFE211 SNR N 18 mm Bearing units
Bearing number USFE211 Brand SNR Bore Diameter (mm) 55 d 55 mm e 31 mm s 11.8 mm A 48.5 mm A1 15 mm B1 45.3 mm D1 69 mm J 130 mm L 162 mm N 18 mm Thread (G) R1/8" A2 64.5 mm Weight 3.6 Kg Basic dynamic load rating (C) 43.55 kN
ISB 53226 U 226 thrust ball bearings
offers a ISB 53226 U 226 thrust ball bearings 28 mm B selection 55 mm d of Genuine at Wholesale Prices. We are a ISB 53226 U 226 thrust ball bearings Certified Parts Retailer d 55 mm B 28 mm F 65 mm rs min 1.1 mm Lubrication hole on inner ring Non/No t 2.2
SCH1310 AST Dynamic Load Rating (Cr) 3.550 Needle roller bearings
Bearing number SCH1310 Brand AST Bore Diameter (mm) 20.6502 Outer Diameter (mm) 28.575 Width (mm) 15.875 Bearing Type Cage Retained Rollers Outer Dia (D) 1.1250 Width (B) 0.6250 Dynamic Load Rating (Cr) 3.550 Static Load Rating (Cor) 4.650 Max Speed (Grease) (X1000 RPM) 13.600 Shaft (Fw) 0.813 Weight (g) 25.00 Material – Drawn cup: Hardened