NKE NNCF5044-V cylindrical roller bearings
Various types 175 mm Shaft Size and sizes to Split Cylindrical Retained Type Bearing Type accommodate your NKE NNCF5044-V cylindrical roller bearings requirements.
| Shaft Size | 175 mm |
| Seal Type | Felt Seal |
| Bearing Type | Split Cylindrical Retained Type |
| Support Type | Round Flange |
| Series Type | Medium Series |
| Bolt Size | 4 x M30 |
| Bearing – Housing – Seal | MSM175BRH |
| Dimension T | 23.5 in |
| Dimension R | 20.6 in |
| Dimension P | 1.3 in |
| Dimension H | 5.1 in |
| Dimension N | 17.500 in |
| Dimension V | 0.2 in |
| Dimension L | 9.5 in |
| Cr – Dynamic Load Rating | 208398 lbf |
| Cor – Static Load Rating | 305066 lbf |
| Ca – Axial Load Rating | 16006 lbf |
| Maximum Speed | 1120 rpm |
| Note | This product line was formerly known as “Revolvo” |
Detailed Parameters
parameter：
Similar products
NSK 626 ZZ1 deep groove ball bearings
With over 10170 full-service stores, our 57,15 Bore Diameter (mm) NSK 626 ZZ1 deep groove ball bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time 57.15×96.838×25.4 Size (mm) and your hard-earned dollars. Size (mm) 57.15×96.838×25.4 Bore Diameter (mm) 57,15 Outer Diameter (mm)
NTN HUR040-10 tapered roller bearings
YOU’LL FIND 1.4375 in d 2-7/16 in base width: AN EXTENSIVE SELECTION OF NTN HUR040-10 tapered roller bearings FOR SALE. d 1.4375 in base width: 2-7/16 in overall length: 8.1250 in expansion type: Expansion Bearing (Floating) overall height: 4.3438 in finish/coating: Powder Coated mounting: Two-Bolt Base B 3-9/16 in bearing type: Spherical Roller seal type:
UST201+WB SNR SW 11 mm Bearing units
Bearing number UST201+WB Brand SNR Bore Diameter (mm) 12 d 12 mm A4 367 mm P 150 mm e 29 mm L2 83 mm s 6 mm SW 11 mm A 50 mm B1 22 mm D1 24.6 mm H 199 mm J 154 mm L 317 mm M 117 mm M1 19 mm N
SI45ES LS W 65 mm Plain bearings
Bearing number SI45ES Brand LS Bore Diameter (mm) 45 d 45 mm B 32 mm d2 102 mm d3 58 mm d4 70 mm dk 60 mm h1 145 mm l3 min. 65 mm l4 max. 196 mm l5 20 mm l7 min. 52 mm r min. 0.6 mm C1 max 28 mm W 65