KOYO SE 6205 ZZSTMSA7 deep groove ball bearings
With over 10170 full-service stores, our KOYO SE 6205 ZZSTMSA7 deep groove ball bearings inventory 400 Outer Diameter (mm) is extensive and our parts 240 Bore Diameter (mm) are priced right. within 24 hours. This helps 240x400x128 Size (mm) you maximize your productivity by saving time and your hard-earned dollars.
| Size (mm) | 240x400x128 |
| Bore Diameter (mm) | 240 |
| Outer Diameter (mm) | 400 |
| Width (mm) | 128 |
| d | 240 mm |
| D | 400 mm |
| T | 128 mm |
| C | 114 mm |
| r min. | 5 mm |
| r1 min. | 1,5 mm |
| da min. | 262 mm |
| Da min | 377 mm |
| ra max. | 4 mm |
| rb max. | 1,5 mm |
| Weight | 59 Kg |
| Basic dynamic load rating (C) | 1190 kN |
| Basic static load rating (C0) | 2180 kN |
| (Grease) Lubrication Speed | 630 r/min |
| (Oil) Lubrication Speed | 840 r/min |
| Calculation factor (e) | 0,35 |
| Calculation factor (Y0) | 1,91 |
| Bearing No. | 46348 |
| r(min) | 5 |
| r1(min) | 1.5 |
| Cr | 1490 |
| C0r | 2180 |
| Cu | 121 |
| Grease lub. | 630 |
| Oil lub. | 840 |
| da(min) | 262 |
| Da(min) | 391.5 |
| Sa(min) | 7 |
| ra(max) | 4 |
| rb(max) | 1.5 |
| e | 0.35 |
| Y2 | 1.95 |
| Y3 | 2.90 |
| Y0 | 1.91 |
| (Refer.)Mass(kg) | 59.0 |
Detailed Parameters
parameter：
Similar products
USPFL205 SNR N 8.7 mm Bearing units
Bearing number USPFL205 Brand SNR Bore Diameter (mm) 25 d 25 mm s 7.5 mm A 8.7 mm A1 4 mm B1 27 mm D1 34 mm H 95.2 mm J 76.2 mm L 71 mm N 8.7 mm J2 60 mm Weight 0.4 Kg Basic dynamic load rating (C) 14 kN
ESP205 SNR Thread (G) M6x1 Bearing units
Bearing number ESP205 Brand SNR Bore Diameter (mm) 25 d 25 mm s 7.5 mm A 38 mm A1 26 mm B1 30.9 mm D2 38.1 mm H 36.5 mm H1 16 mm H2 70 mm J 105 mm L 140 mm L1 42 mm N 13 mm N1 19 mm Thread (G) M6x1 Weight
NTN KJ28.1X32.1X23.8 needle roller bearings
Can’t find what you’re looking 2.9375 in d for NTN KJ28.1X32.1X23.8 needle roller bearings ? Our expert Representatives Powder Coat finish/coating: be in contact with you 11.6300 in overall length: shortly! d 2.9375 in finish/coating: Powder Coat overall length: 11.6300 in B 3.8700 in overall height: 6.4700 in seal type: Labyrnith non-contacting, non-purging seal with
LM10AJ Samick 10x19x22mm Basic dynamic load rating (C) 0.37 kN Linear bearings
Bearing number LM10AJ Size (mm) 10x19x22 Brand Samick Bore Diameter (mm) 10 Outer Diameter (mm) 19 Width (mm) 22 d 10 mm D 19 mm h 1 mm B 22 mm D1 18 mm L 29 mm W 1.3 mm Weight 0.03 Kg Basic dynamic load rating (C) 0.37 kN