IKO GBRI 527632 needle roller bearings
Browse IKO GBRI 527632 needle roller bearings Categories in 10x14x10 Size (mm) the Manufacturers Online Free. including .
| Size (mm) | 10x14x10 |
| Bore Diameter (mm) | 10,000 |
| Outer Diameter (mm) | 14,000 |
| Width (mm) | 10,000 |
| Fw | 10,000 mm |
| D | 14,000 mm |
| C | 10,000 mm |
| Dw | 1.5 mm |
| Lw | 6.3 mm |
| Lubrication hole on outer ring | Oui/Yes |
| k | 2 mm |
| Inner ring reference | IR7X10X10.5 |
| Mass | 0.0038 kg |
| Cr | 4.5 kN |
| C0r | 5.1 kN |
| Nlim (grease) | 16,000 rpm |
| Nlim (oil) | 24,000 rpm |
| Min operating temperature, Tmin | -20 °C |
| Max operating temperature, Tmax | 120 °C |
| Characteristic cage frequency, FTF | 0.44 Hz |
| Characteristic rolling element frequency, BSF | 7.54 Hz |
| Characteristic outer ring frequency, BPF0 | 6.52 Hz |
| Characteristic inner ring frequency, BPFI | 8.48 Hz |
Detailed Parameters
parameter：
Similar products
Timken K40X45X17CH needle roller bearings
Timken K40X45X17CH needle roller bearings SEARCH – Whether it’s agriculture or construction equipment your 130 mm Fw working on, Has the you need. Fw 130 mm Ew 137 mm Bc 24 mm Dw 3.5 mm Lw 17.8 mm Mass 0.17 kg Cr 59 kN C0r 175 kN Nlim (grease) 2,100 rpm Nlim (oil) 3,100 rpm
FAG NU330-E-M1 cylindrical roller bearings
Welcome to the FAG NU330-E-M1 cylindrical roller bearings 50x110x27 Size (mm) online seller. 50 Bore Diameter (mm) Size (mm) 50x110x27 Bore Diameter (mm) 50 Outer Diameter (mm) 110 Width (mm) 27 d 50 mm D 110 mm B 27 mm C 27 mm r min. 2 mm da min. 59 mm da max 68 mm
ALP207-21 KOYO B1 36.5 mm Bearing units
Bearing number ALP207-21 Brand KOYO Bore Diameter (mm) 33.3375 Width (mm) 47.6 d 33.3375 mm A 35 mm B1 36.5 mm H 47.6 mm H1 16 mm H2 93 mm J 127 mm L 165 mm L1 50 mm N 14 mm N1 21 mm S 8.5 mm Bolt (G) M12 Weight 1 Kg Basic
NACHI UCTU211+WU500 bearing units
NACHI UCTU211+WU500 bearing units 20 mm d 20 mm B SEARCH – Whether it’s agriculture or construction equipment your working on, Has the you need. d 20 mm D 28 mm B 20 mm Tolerance shaft h8 Tolerance housing H7 Specific dynamic load factor K 10 N/mm² Specific static load factor K0 20 N/mm² Permissible