Fersa 6207/33 deep groove ball bearings
Online Fersa 6207/33 deep groove ball bearings Expert.More 77.8 mm Ca Choices. Fersa 6207/33 deep groove ball bearings in Stock & Ready to 122.237 mm da Ship Now!
| da | 122.237 mm |
| Da | 250 mm |
| Ca | 77.8 mm |
| A1 | 149.225 mm |
| A2 | 260.35 mm |
| S | 4.763 mm |
| ba | 61.119 mm |
| H | 298.45 mm |
| H1 | 152.4 mm |
| H2 | 60.325 mm |
| J min. | 406.4 mm |
| J max. | 434.975 mm |
| J1 | 85.725 mm |
| L | 511.175 mm |
| N1 | 28.575 mm |
| R1 | 87.313 mm |
| R2 | 38.1 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 51.594 mm |
| Housing | SAFS 528 |
| Bearing | 22228 CCK/W33 |
| Adapter sleeve assembly | SNW 28×4.13/16 |
| Stabilizing ring | SR-28-0 |
| Taconite seal | TER 120 |
| End plug (suffix Y) | EPR 27 |
| Max. speed for Taconite seal | 625 r/min |
| P60° | 301 kN |
| P90° | 180 kN |
| P120° | 116 kN |
| P150° | 105 kN |
| P180° | 127 kN |
| Pa | 28.5 kN |
| Mass pillow block | 92.5 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 481.95 g |
Detailed Parameters
parameter：
Similar products
NTN 5S-7201UCG/GNP42 angular contact ball bearings
NTN 5S-7201UCG/GNP42 angular contact ball bearings Manufacturers 3-3/8 in D , Online 4000 psi maximum p value: Wholesale Suppliers ! D 3-3/8 in maximum p value: 4000 psi overall length: 4 in maximum v value: 750 fp/min sleeve bearing type: Plain Sleeve material specification: SAE 660 (C932) bearing material: Cast Bronze C93200 (SAE 660) standards
SNFA E 215 7CE1 angular contact ball bearings
How do you find the SNFA E 215 7CE1 angular contact ball bearings specification? Manufacturers Online 14 mm d Free check！ d 14 mm D 18 mm B 10 mm Tolerance shaft h8 Tolerance housing H7 Specific dynamic load factor K 10 N/mm² Specific static load factor K0 20 N/mm² Permissible sliding velocity v min.
SNR AB40360 deep groove ball bearings
170 Million used SNR AB40360 deep groove ball bearings instantly searchable. Shop our large selection of parts based 100 mm d on brand, price, description, and location. Order the with stock … d 100 mm maximum p value: 10 N/mm2 D 125 mm maximum v value: Periodic lubrication 1.00;Oil lubrication 3.35 m/s overall length: 80
Timken 210RN03 cylindrical roller bearings
With over 10170 full-service stores, our Timken 210RN03 cylindrical roller bearings inventory is extensive and our parts 35x80x21 Size (mm) are priced right. within 24 hours. This helps 80 Outer Diameter (mm) you maximize your productivity by saving time and your hard-earned dollars. Size (mm) 35x80x21 Bore Diameter (mm) 35 Outer Diameter (mm) 80 Width