Fersa 33006F tapered roller bearings

YOU’LL FIND AN EXTENSIVE SELECTION OF 49 mm A Fersa 33006F tapered roller bearings FOR SALE.
A | 49 mm |
A1 | 16 mm |
A2 | 35 mm |
B | 49.2 mm |
A5 | 30.2 mm |
d | 44.45 mm |
Dz | 95 mm |
G | M6x1 |
H | 117 mm |
H1 | 102 mm |
H2 | 83 mm |
L | 144 mm |
L1 | 87 mm |
L2 | 16 mm |
L3 | 83 mm |
N | 29mm |
N1 | 19 mm |
N2 | 49 mm |
P | 300 mm |
s1 | 24.6 mm |
S | 19 mm |
SW | 3.97 mm |
Z | 70.2 mm |
C | 31.85 kN |
C0 | 20.8 kN |
T min. | -20 °C |
T max. | 100 °C |
Weight | 2.38 kg |
Recommended tightening torque for set screw | 8 Nm |
Designation of housing | T209N- |
Designation of bearing | UC209-28G2L4 |
Designation of open end cover | SCOU209-28 |
Detailed Parameters
parameter:
Similar products
SKF S71902 ACE/HCP4A angular contact ball bearings
LET OUR SKF S71902 ACE/HCP4A angular contact ball bearings EXPERTS GET 70 Bore Diameter (mm) YOU THE PARTS 70x125x24 Size (mm) YOU NEED. Size (mm) 70x125x24 Bore Diameter (mm) 70 Outer Diameter (mm) 125 Width (mm) 24 d 70 mm D 125 mm B 24 mm C 24 mm Angle (α) 40 ° a 29.0
16048 SKF 240x360x37mm D1 ≈ 317.3 mm Deep groove ball bearings
Bearing number 16048 Size (mm) 240x360x37 Brand SKF Bore Diameter (mm) 240 Outer Diameter (mm) 360 Width (mm) 37 d 240 mm D 360 mm B 37 mm C 37 mm d1 279 mm r1 min. 2.1 mm r2 min. 2.1 mm D1 318 mm D2 – mm da min. 250 mm Da max. 350
NACHI 6328Z deep groove ball bearings
With over 10170 full-service Available Volume Discount stores, our 6 RoHS NACHI 6328Z deep groove ball bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. Volume Discount Available Days to Ship 7 Days RoHS 6 Bearing I.D. d(mm)
JNS NA496M needle roller bearings
QuestionJNS NA496M needle roller bearings ? Find what you need faster by entering 1/2 in d your information . d 1/2 in maximum p value: 4000 psi D 3/4 in maximum v value: 750 fp/min overall length: 2 in material specification: SAE 660 (C932) sleeve bearing type: Plain Sleeve standards met: 83-7-7-3, ASTM B505, CDA