FAG 7214-B-JP angular contact ball bearings
FAG 7214-B-JP angular contact ball bearings Deal is 12 in travel: your source for 2.9375 in d OEM and accessories. We sell Genuine at discount prices.
| d | 2.9375 in |
| housing material: | Cast Iron |
| travel: | 12 in |
| locking device: | Setscrew |
| frame overall length: | 23.8750 in |
| seal type: | Contact Seal |
| frame type: | Center Pull |
| overall height: | 3.0000 in |
| bearing type: | Ball Bearing |
| overall length: | 27.5000 in |
| duty type: | Standard Duty |
| operating temperature range: | Max 250° |
| frame material: | Cast Iron |
| bolt size: | .6250 in |
| frame base width: | 12.0000 in |
| series: | STH |
| finish/coating: | Uncoated |
| manufacturer catalog number: | 716447 |
Detailed Parameters
parameter：
Similar products
SCE45 INA 6.35×11.112×7.938mm Harmonized Tariff Code 8482.40.00.00 Needle roller bearings
Bearing number SCE45 Size (mm) 6.35×11.112×7.938 Brand INA Bore Diameter (mm) 6.35 Outer Diameter (mm) 11.112 Width (mm) 7.938 Fw 1/4 inch Fw 6.35 mm D 0.437 inch D 11.112 mm C 0.313 inch C 7.938 mm m 0.005 lbs / Weight m 2 g / Weight Cr 560 lbf / Dynamic load rating (radial)
FBJ NUP207 cylindrical roller bearings
Our highly-skilled and factory-trained service experts have the resources to help you with 49.2 mm B all your FBJ NUP207 cylindrical roller bearings needs 10 mm A1 – including routine maintenance, major repairs, warranty service, and equipment inspections. B 49.2 mm A 38 mm A1 10 mm A2 40.2 mm A4 26 mm d 42.86
ISB SS 61906 deep groove ball bearings
With over 10170 full-service stores, our ISB SS 61906 deep groove ball bearings inventory is extensive and our parts are priced 0.0 Inventory right. within 24 hours. This helps you maximize your N/A Minimum Buy Quantity productivity by saving time and your hard-earned dollars. Inventory 0.0 Manufacturer Name TIMKEN Minimum Buy Quantity N/A Weight 1.239
ESEHE206 SNR d 30 mm Bearing units
A2 40 mm B 23.8 mm A5 14.8 mm d1 44.1 mm G R1/8″ L1 72 mm L3 40 mm s1 27.8 mm S 9 mm SW 4 mm C 19.5 kN C0 11.2 kN T min. -20 °C T max. 100 °C Recommended tightening torque for set screw 11.5 Nm Designation of housing EHE206-