Crossed Roller Bearing Ru Type Ru 297 (G)
With over 10170 full-service stores, 20x42x12 Size (mm) our Crossed Roller Bearing Ru Type Ru 297 (G) inventory 42 Outer Diameter (mm) is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Size (mm) | 20x42x12 |
| Bore Diameter (mm) | 20 |
| Outer Diameter (mm) | 42 |
| Width (mm) | 12 |
| d | 20 mm |
| D | 42 mm |
| B | 12 mm |
| C | 12 mm |
| r min. | 0,6 mm |
| da min. | 24 mm |
| Da max. | 38 mm |
| ra max. | 0,6 mm |
| Weight | 0,073 Kg |
| Basic dynamic load rating (C) | 11,5 kN |
| Basic static load rating (C0) | 5,85 kN |
| (Grease) Lubrication Speed | 18000 r/min |
| (Oil) Lubrication Speed | 21000 r/min |
| Bearing No. | 6004R |
| r(min) | 0.6 |
| Cr | 14.4 |
| C0r | 5.85 |
| Cu | 0.460 |
| f0 | 13.0 |
| Grease lub. | 18000 |
| Oil lub. | 21000 |
| da(min) | 24 |
| Da(max) | 38 |
| ra(max) | 0.6 |
| (Refer.)Mass(kg) | 0.073 |
Detailed Parameters
parameter：
Similar products
LMKP12 Samick Tolerance perpendicularity (C) 12 Linear bearings
Bearing number LMKP12 Brand Samick Bore Diameter (mm) 12 Outer Diameter (mm) 21 d 12 mm D 21 mm d1 4.5 mm d2 8 mm h 4.4 mm D1 42 mm H 6 mm K 32 mm L 30 mm PCD 32 mm ℓ 6 Tolerance h14 Tolerance perpendicularity (C) 12 Weight 0.078 Kg Basic
NACHI 7320CDT angular contact ball bearings
We Provide Extensive NACHI 7320CDT angular contact ball bearings Selection And 25x68x21 Size (mm) Competitive 25 Bore Diameter (mm) Wholesale Pricing. Size (mm) 25x68x21 Bore Diameter (mm) 25 Outer Diameter (mm) 68 Width (mm) 21 d 25 mm D 68 mm B 21 mm C 21 mm
ISB SX 011848 thrust roller bearings
With over 1.2500 in d 10170 full-service stores, our ISB SX 011848 thrust roller bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and 2.4375 in slot spacing: your hard-earned dollars. d 1.2500 in seal type: Dual Lip with Slinger slot spacing:
NTN K42X48X16.6 needle roller bearings
NTN K42X48X16.6 needle roller bearings Needs Analysis Mounted Bearing Engineering Group , Imperial Shaft Size Type Manufacturing Service . Get 1-15/16 in Shaft Size Your Free. Engineering Group Mounted Bearing Shaft Size 1-15/16 in Shaft Size Type Imperial Full Timken Part Number QMPL10J115SB Locking Style Eccentric Weight 13 lb Housing Style Two-Bolt Pillow Block UPC