Toyana CX176 wheel bearings
3/8-24 thread size: are a few brands you will find in our inventory. 0.8750 in roller diameter: Find Toyana CX176 wheel bearings to see what’s in stock!
| roller diameter: | 0.8750 in |
| thread size: | 3/8-24 |
| roller width: | 0.5000 in |
| radial dynamic load capacity: | 1660 lbs |
| stud diameter: | 0.3750 in |
| radial static load capacity: | 1500 lbs |
| stud length: | 0.8750 in |
| maximum rpm: | 5400 rpm |
| roller shape: | Flat |
| lubrication hole location: | Stud Side |
| roller material: | Chrome Steel |
| eccentric stud diameter: | 0.5000 in |
| bearing element: | Needle Rollers |
| finish/coating: | Black Oxide |
| stud type: | Eccentric |
| series: | Inch CAMROL (CF) |
| closure type: | Sealed |
| manufacturer catalog number: | 2080212000 |
| head type: | Hex |
Detailed Parameters
parameter：
Similar products
AST NJ2217 EMA cylindrical roller bearings
With over 10170 full-service stores, our AST NJ2217 EMA cylindrical roller bearings 11 Outer Diameter (mm) inventory is extensive and our parts are priced right. within 7x11x3 Size (mm) 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. 7 Bore Diameter (mm) Size (mm) 7x11x3 Bore Diameter (mm) 7
15113/15245 ISO C 14.288 mm 28.575x62x19.05mm Tapered roller bearings
Bearing number 15113/15245 Size (mm) 28.575x62x19.05 Brand ISO Bore Diameter (mm) 28.575 Outer Diameter (mm) 62 Width (mm) 19.05 d 28.575 mm D 62 mm T 19.05 mm B 20.638 mm C 14.288 mm a 5.8 mm
Z-531149.04.DRGL FAG Width 90mm 100x260x90mm Spherical roller bearings
Bearing number Z-531149.04.DRGL Size (mm) 100x260x90 Brand FAG Bore Diameter (mm) 100 Outer Diameter (mm) 260 Width (mm) 90 d 100 mm D 260 mm B 90 mm B1 100 mm C 69 mm
24156-B-K30 FAG Calculation factor (Y0) 1.67 280x460x180mm Spherical roller bearings
Bearing number 24156-B-K30 Size (mm) 280x460x180 Brand FAG Bore Diameter (mm) 280 Outer Diameter (mm) 460 Width (mm) 180 d 280 mm D 460 mm B 180 mm C 180 mm n 15 mm r min. 5 mm D1 392.8 mm da min. 300 mm Da max. 440 mm ra max. 4 mm d5 8