SKF NJ 222 ECM thrust ball bearings
Online SKF NJ 222 ECM thrust ball bearings 50 mm d Expert.More Choices. SKF NJ 222 ECM thrust ball bearings in Stock & Ready to Two-Bolt Base mounting: Ship Now!
| mounting: | Two-Bolt Base |
| overall height: | 4.5625 in |
| d | 50 mm |
| B | 2.0313 in |
| bore type: | Round |
| operating temperature range: | Max 250° |
| base to bore centerline: | 2.2500 in |
| base width: | 2.3750 in |
| duty type: | Normal Duty |
| D | 6.0000 to 6.5000 in |
| housing material: | Stainless Steel |
| bolt size: | .6250 in |
| locking device: | Set Screw |
| lubrication type: | Lubrication Fitting |
| seal type: | Contact/Lip |
| series: | NP |
| expansion type: | Non-Expansion Bearing (Fixed) |
| replacement bearing: | 5210 FG2 |
| overall length: | 8.1250 in |
| manufacturer catalog number: | 707241 |
Detailed Parameters
parameter：
Similar products
NTN RNAO-18×30×24ZW needle roller bearings
Browse 12 mm d NTN RNAO-18×30×24ZW needle roller bearings Categories 14 mm B in the Manufacturers Online 32 mm D Free. including . d 12 mm D 32 mm B 14 mm d1 18.3 mm D1 27.9 mm rs min 0.6 mm Radial clearance class C3 Mass 0.05 kg Dynamic load, C 6.8 kN Static
USPF209 SNR J2 97 mm Bearing units
Bearing number USPF209 Brand SNR Bore Diameter (mm) 45 d 45 mm s 10.2 mm A 10 mm A1 7 mm B1 41.2 mm D1 57.2 mm H 149.2 mm N 13.5 mm J1 120.5 mm J2 97 mm Weight 1.7 Kg Basic dynamic load rating (C) 31.85 kN
NTN K58×64×19 needle roller bearings
Browse NTN K58×64×19 needle roller bearings Categories in the Plain bushing type: Manufacturers Online Free. including . bushing type: Plain maximum p value: 36250 inside diameter: 12 mm maximum pv value: 51000 bushing outside diameter: 14 mm operating temperature range: -328 to 536 ºC overall length: 25 mm backing material: Steel bushing material: PTFE manufacturer
160TAC29D+L NSK 160x220x72mm ra max. 2 mm Thrust ball bearings
Bearing number 160TAC29D+L Size (mm) 160x220x72 Brand NSK Bore Diameter (mm) 160 Outer Diameter (mm) 220 Width (mm) 72 d 160 mm D 220 mm T 72 mm C 36 mm Angle (α) 60 ° r min. 2 mm r1 min. 1 mm Da 210 mm ra max. 2 mm rb max. 1 mm da