Timken 482/473 tapered roller bearings
Timken 482/473 tapered roller bearings Product Brochures , 41.28 mm d Manufacturing Service . Get Your Free.
| d | 41.28 mm |
| D | 73.43 mm |
| B | 19.81 mm |
| C | 14.73 mm |
| T | 19.56 mm |
| d1 | 57 mm |
| a | 16.3 mm |
| rs min | 3.5 mm |
| r1s min | 0.8 mm |
| e | 0.4 |
| Y2 | 1.5 |
| Y0 | 0.83 |
| Mass | 0.33 kg |
| Dynamic load, C | 56.4 kN |
| Rating life coefficient, A2 | 1 |
| Static load, C0 | 70.1 kN |
| Fatigue limit load, Cu | 8.5 kN |
| Nref | 5,100 rpm |
| Nlim | 9,500 rpm |
| Min operating temperature, Tmin | -40 °C |
| Max operating temperature, Tmax | 120 °C |
| Characteristic cage frequency, FTF | 0.43 Hz |
| Characteristic rolling element frequency, BSF | 7.12 Hz |
| Characteristic outer ring frequency, BPF0 | 8.23 Hz |
| Characteristic inner ring frequency, BPFI | 10.77 Hz |
| db min | 57.28 mm |
| Da max | 68.3 mm |
| ra max | 2.5 mm |
| r1a max | 0.8 mm |
Detailed Parameters
parameter：
Similar products
W638/3-2RS1 SKF da min. 3.8 mm 3x7x3mm Deep groove ball bearings
Bearing number W638/3-2RS1 Size (mm) 3x7x3 Brand SKF Bore Diameter (mm) 3 Outer Diameter (mm) 7 Width (mm) 3 d 3 mm D 7 mm B 3 mm C 3 mm d1 – mm d2 3.8 mm r1 min. 3.7 mm r2 min. 3.7 mm D1 6.4 mm D2 0.1 mm da min. 3.8 mm
EXP213 SNR H1 27 mm Bearing units
Bearing number EXP213 Brand SNR Bore Diameter (mm) 65 d 65 mm s 34.1 mm A 70 mm A1 46 mm B1 85.7 mm D2 86 mm H 76.2 mm H1 27 mm H2 150 mm J 203 mm L 265 mm L1 77 mm N 25 mm N1 29 mm Thread (G) M6x1 Weight
AST AST50 WC07IB plain bearings
What is the best place 1760 lbf radial static load capacity: to buy AST AST50 WC07IB plain bearings online? 1.0000 in d Manufacturing Service . d 1.0000 in radial static load capacity: 1760 lbf D 3.9063 in seal type: Contact with Flinger B 70 mm length through bore: 42.5 mm bore type: Round operating temperature
2LA-BNS014ADLLBG/GNP42 NTN 70x110x20mm C 20 mm Angular contact ball bearings
Bearing number 2LA-BNS014ADLLBG/GNP42 Size (mm) 70x110x20 Brand NTN Bore Diameter (mm) 70 Outer Diameter (mm) 110 Width (mm) 20 d 70 mm D 110 mm B 20 mm C 20 mm Angle (α) 25 °