SNR FC40887 tapered roller bearings
QuestionSNR FC40887 tapered roller bearings ? Find 48 mm A 31 mm A1 what you need faster by entering your 42.9 mm B information .
| A | 48 mm |
| A1 | 31 mm |
| B | 42.9 mm |
| d | 35 mm |
| Dz | 80 mm |
| G | M6x1 |
| H | 47.6 mm |
| H1 | 19 mm |
| H2 | 94 mm |
| J | 127 mm |
| L | 167 mm |
| L1 | 54 mm |
| N | 17mm |
| N1 | 21 mm |
| s1 | 21.45 mm |
| S | 17.5 mm |
| Z | 60 mm |
| C | 25.7 kN |
| C0 | 15.2 kN |
| T min. | -20 °C |
| T max. | 100 °C |
| Weight | 1.78 kg |
| Recommended tightening torque for set screw | 11.5 Nm |
| Designation of housing | P207N- |
| Designation of bearing | UC207G2L3 |
| Designation of closed end cover | SCC207 |
| Designation of open end cover | SCO207-35 |
Detailed Parameters
parameter：
Similar products
24130-E1-2VSR-H40 FAG Basic dynamic load rating (C) 1050 kN 150x250x100mm Spherical roller bearings
Bearing number 24130-E1-2VSR-H40 Size (mm) 150x250x100 Brand FAG Bore Diameter (mm) 150 Outer Diameter (mm) 250 Width (mm) 100 d 150 mm D 250 mm B 100 mm C 100 mm d2 163.1 mm r min. 2.1 mm D1 228.9 mm da min. 162 mm Da max. 238 mm ra max. 2.1 mm Weight 20.6
XLJ3.1/4 RHP d 82.55 mm 82.55×120.65×19.05mm Deep groove ball bearings
Bearing number XLJ3.1/4 Size (mm) 82.55×120.65×19.05 Brand RHP Bore Diameter (mm) 82.55 Outer Diameter (mm) 120.65 Width (mm) 19.05 d 82.55 mm D 120.65 mm B 19.05 mm C 19.05 mm Weight 0.807 Kg Basic dynamic load rating (C) 30.5 kN Basic static load rating (C0) 28.3 kN (Grease) Lubrication Speed 2700 r/min
INA F-91916 needle roller bearings
Enjoy High Margins on 17 ° misalignment angle: Competitive Pricing.Great 10 mm d Wholesale Products at Low Costs. d 10 mm ball material: 52100 BEARING STEEL HEAT TREATED CHROME PLATE misalignment angle: 17 ° race material: Alloy Steel – Heat Treated shank thread length: 21 mm radial static load capacity: 50,277 N rod end type:
ISO N3238 cylindrical roller bearings
are 4000 psi maximum p value: a few brands you 1-1/8 in d will find in our inventory. Find ISO N3238 cylindrical roller bearings to see what’s in stock! d 1-1/8 in maximum p value: 4000 psi D 1-1/4 in maximum v value: 750 fp/min overall length: 2 in material specification: SAE 660 (C932) sleeve