SKF 30216J2/Q tapered roller bearings
SKF 30216J2/Q tapered roller bearings Needs Analysis 2150 lbf radial dynamic load capacity: , Manufacturing Service . 2.4375 in d Get Your Free.
| d | 2.4375 in |
| radial dynamic load capacity: | 2150 lbf |
| D | 7.9531 in |
| radial static load capacity: | 1080 lbf |
| B | 9.8125 in |
| seal type: | Contact Seal |
| bore type: | Round |
| length through bore: | 0.866 in |
| duty type: | Standard Duty |
| lubrication type: | Lubrication Fitting |
| mounting type: | Two-Bolt Flange |
| series: | UCFL200NP |
| housing material: | Cast Iron – Nickel Protection |
| replacement bearing: | UC212-39 |
| locking device: | Set Screw |
Detailed Parameters
parameter：
Similar products
NACHI NJ 336 cylindrical roller bearings
Browse NACHI NJ 336 cylindrical roller bearings Categories 101.6×142.875×22.23 Size (mm) in 101,6 Bore Diameter (mm) the Manufacturers Online Free. including . Size (mm) 101.6×142.875×22.23 Bore Diameter (mm) 101,6 Outer Diameter (mm) 142,875 Width (mm) 22,23 d 101,6 mm D 142,875 mm B 22,23 mm C 22,23 mm
119044X/119088XG Gamet C 55.66 mm 44.45×88.9x62mm Tapered roller bearings
Bearing number 119044X/119088XG Size (mm) 44.45×88.9×62 Brand Gamet Bore Diameter (mm) 44.45 Outer Diameter (mm) 88.9 Width (mm) 62 d 44.45 mm D 88.9 mm T 62 mm C 55.66 mm r 0.8 mm F 3.17 mm L 6 mm R 2 mm db 81 mm da 55 mm Weight 1.17 Kg
Loyal 9O-1B16-0350-0669-1 bearing
170 Million used Loyal 9O-1B16-0350-0669-1 bearing instantly searchable. Shop our large selection Imperial Design Units of parts based on brand, price, description, and location. Order the 95000 Series with stock 95499D Cone Part Number … Series 95000 Cone Part Number 95499D Design Units Imperial Cage Type Stamped Steel db – Cone Backface Backing Diameter 5.98
INA K75X83X35-ZW needle roller bearings
170 Million used INA K75X83X35-ZW needle roller bearings instantly searchable. 110 mm d Shop our large selection of parts based on brand, price, description, and location. Order the with stock … d 110 mm D 180 mm B 56 mm D1 160.9 mm rs min 2 mm Number of lubrication holes 3 b 8.9 mm