NTN LM767749D/LM767710+A tapered roller bearings
The online NTN LM767749D/LM767710+A tapered roller bearings parts store gives you immediate access to a selection 180 mm Da of more than 1.4 million new, used, remanufactured. 88.9 mm da
| da | 88.9 mm |
| Da | 180 mm |
| Ca | 55.804 mm |
| A1 | 111.125 mm |
| A2 | 222.25 mm |
| S | 4.763 mm |
| ba | 44.45 mm |
| H | 217.488 mm |
| H1 | 114.3 mm |
| H2 | 44.45 mm |
| J min. | 295.275 mm |
| J max. | 333.375 mm |
| J1 | 60.325 mm |
| L | 387.35 mm |
| N1 | 22.225 mm |
| R1 | 58.737 mm |
| R2 | 30.163 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 42.069 mm |
| Housing | FSAF 520 |
| Bearing | 22220 EK |
| Adapter sleeve assembly | SNW 20×3.1/2 |
| Stabilizing ring | SR-20-17 |
| Taconite seal | TER 103 |
| End plug (suffix Y) | EPR 15 |
| Max. speed for Taconite seal | 900 r/min |
| P60° | 119 kN |
| P90° | 71.2 kN |
| P120° | 44.5 kN |
| P150° | 40 kN |
| P180° | 48.9 kN |
| Pa | 13.8 kN |
| Mass pillow block | 28.1 kg |
| Cap bolt | 2 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 203.4 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 181.44 g |
Detailed Parameters
parameter：
Similar products
AST NU244 EMAS cylindrical roller bearings
AST NU244 EMAS cylindrical roller bearings Single Row Configuration Manufacturers Open Enclosure , Online Wholesale Suppliers ! Enclosure Open Configuration Single Row Bore Type Cylindrical Bore d 200 mm D 420 mm B 138 mm Inside Ring Outside Diameter 260 mm Fillet Radius/Chamfer 5 mm r1 5 mm Dynamic Load Rating 1,510,000 N Static Load
KOYO MK871 needle roller bearings
Enjoy High Margins on Competitive 190x90x43 Size (mm) Pricing.Great Wholesale Products at Low Costs. 190 Bore Diameter (mm) Size (mm) 190x90x43 Bore Diameter (mm) 190 Outer Diameter (mm) 90 Width (mm) 43 d 90 mm D 190 mm B 43 mm D1 160.3 mm F 113.5 mm r1,2 – min. 3 mm r3,4 – min.
TRA0607R KOYO Da(min) 58 30x72x20.75mm Tapered roller bearings
Bearing number TRA0607R Size (mm) 30x72x20.75 Brand KOYO Bore Diameter (mm) 30 Outer Diameter (mm) 72 Width (mm) 20.75 d 30 mm D 72 mm T 20.75 mm B 19 mm C 14 mm a 18.6 mm r min. 1.5 mm r2 min. 1.5 mm da min. 38.5 mm da max 39 mm Da min
INA PCJT1/2 bearing units
Browse INA PCJT1/2 bearing units Categories 70 mm d in the Manufacturers Online Free. including . d 70 mm static load capacity: 138000 N D 125 mm precision rating: Not Rated B 24 mm maximum rpm: 6800 RPM flanges: (2) Outer Ring, (1) Inner Ring cage material: Polyamide bore type: Straight finish/coating: Uncoated number of