Fersa 55200C/55437 tapered roller bearings
Fersa 55200C/55437 tapered roller bearings Needs Analysis , 85 mm d Lubrication Groove & Hole lubrication hole type: Manufacturing Service . Get Your Free.
| d | 85 mm |
| lubrication hole type: | Lubrication Groove & Hole |
| D | 150 mm |
| dynamic load capacity: | 155000 N |
| B | 28 mm |
| static load capacity: | 201000 N |
| bore type: | Tapered 1:12 |
| maximum rpm: | 4750 rpm |
| internal clearance: | C3 |
| bearing material: | Steel |
| closure type: | Open |
| fillet radius: | 2 mm |
Detailed Parameters
parameter：
Similar products
2313K+H2313 Loyal 65x140x48mm Basic dynamic load rating (C) 95.6 kN Self aligning ball bearings
Bearing number 2313K+H2313 Size (mm) 65x140x48 Brand CX Bore Diameter (mm) 65 Outer Diameter (mm) 140 Width (mm) 48 d 65 mm d1 60 mm D 140 mm B 48 mm C 48 mm B1 65 mm B2 14 mm Weight 3.25 Kg Basic dynamic load rating (C) 95.6 kN Basic static load rating (C0)
NTN KBK12×16×15.6 needle roller bearings
QuestionNTN KBK12×16×15.6 needle roller bearings 22,225 mm d ? Find 22,225 Bore Diameter (mm) what you need faster by entering your information . Bore Diameter (mm) 22,225 d 22,225 mm V 70,993 mm U 45,999 mm Thread (Q) 1/8 NPT d3 37,49 mm A 27,508 mm A1 11,989 mm B 44,501 mm H 124,993 mm
2314S NTN Width 51mm 70x150x51mm Self aligning ball bearings
rs min 2.1 mm e 0.38 Y1 1.7 Y2 2.6 Y0 1.8 Radial clearance class CN Precision class P0 Mass 3.9 kg Dynamic load, C 111 kN Static load, C0 37.5 kN Nlim (oil) 4.500 rpm Nlim (grease) 3.600 rpm Min operating temperature, Tmin -20 °C Max operating temperature, Tmax 120 °C da min 81
AST H71940AC/HQ1 angular contact ball bearings
The online AST H71940AC/HQ1 angular contact ball bearings parts store gives you immediate access to a selection of 40 mm inside diameter: more than Flanged Sleeve bushing type: 1.4 million new, used, remanufactured. bushing type: Flanged Sleeve max v value: 0.65 m/s inside diameter: 40 mm maximum p value: 49 N/mm2;Static 137 N/mm2 bushing outside