SNR 11306G15 self aligning ball bearings

SNR 11306G15 self aligning ball bearings with easy-to-use parts graphics, giving you the ability to check 395 Series parts availability, pricing, examine remanufactured options.

Series	395
Cone Part Number	395-S
Cup Part Number	394AB
Design Units	Imperial
Bearing Weight	1.8 lb
Cage Type	Stamped Steel
d	2.6250 in
D	4.3307 in
D1 – Flange Outer Diameter	4.5147 in
B – Cone Width	0.8660 in
C – Cup Width	0.7411 in
C1 – Cup Flange Width	0.1870 in
T1 – Bearing Width	0.8661 in
T – Bearing Width to Flange	0.3120 in
R – Cone Backface To Clear Radius1	0.14 in
r – Cup Backface To Clear Radius2	0.050 in
da – Cone Frontface Backing Diameter	2.87 in
db – Cone Backface Backing Diameter	3.11 in
Da – Cup Frontface Backing Diameter	4.18 in
Ab – Cage-Cone Frontface Clearance	0.11 in
Aa – Cage-Cone Backface Clearance	0.05 in
a – Effective Center Location3	-0.03 in
C90 – Dynamic Radial Rating (90 million revolutions)4	5760 lbf
C1 – Dynamic Radial Rating (1 million revolutions)5	22200 lbf
C0 – Static Radial Rating	28100 lbf
Ca90 – Dynamic Thrust Rating (90 million revolutions)6	3970 lbf
K – Factor7	1.45
e – ISO Factor8	0.4
Y – ISO Factor9	1.49
G1 – Heat Generation Factor (Roller-Raceway)10	56
G2 – Heat Generation Factor (Rib-Roller End)	21.4
Cg – Geometry Factor11	0.0984

Detailed Parameters

parameter：

Similar products

2308-2RS Loyal 40x90x33mm B 33 mm Self aligning ball bearings

Bearing number 2308-2RS Size (mm) 40x90x33 Brand CX Bore Diameter (mm) 40 Outer Diameter (mm) 90 Width (mm) 33 d 40 mm D 90 mm B 33 mm C 33 mm Weight 1.01 Kg Basic dynamic load rating (C) 54 kN Basic static load rating (C0) 16 kN

SDMK10MG KOYO t 6 mm Linear bearings

Bearing number SDMK10MG Brand KOYO Bore Diameter (mm) 10 Outer Diameter (mm) 19 Fw 10 mm D 19 mm P 29 mm t 6 mm D1 40 mm K 30 mm L 29 mm Bolt (G) M4 Weight 61 Kg Basic dynamic load rating (C) 259 kN

KOYO LL575349/LL575310 tapered roller bearings

KOYO LL575349/LL575310 tapered roller bearings Needs Analysis , Manufacturing 400x510x40 Size (mm) Service . Get Your Free. Size (mm) 400x510x40 Bore Diameter (mm) 400 Outer Diameter (mm) 510 Width (mm) 40 d 400 mm D 510 mm B 40 mm a 6 mm b 3,5 mm r min. 3,5 mm dh 479 mm ds 428

T7FC065 ISO 65x130x37mm a 44 mm Tapered roller bearings

Bearing number T7FC065 Size (mm) 65x130x37 Brand ISO Bore Diameter (mm) 65 Outer Diameter (mm) 130 Width (mm) 37 d 65 mm D 130 mm T 37 mm B 33.5 mm C 26 mm a 44 mm