NTN 2317S self aligning ball bearings
Various 12 mm d types and sizes 37 mm D to accommodate your NTN 2317S self aligning ball bearings 2290 lbs dynamic load capacity: requirements.
| d | 12 mm |
| dynamic load capacity: | 2290 lbs |
| D | 37 mm |
| static load capacity: | 940 lbs |
| B | 12 mm |
| bearing material: | Steel |
| bore type: | Round |
| maximum rpm (grease): | 24000 rpm |
| closure type: | Two Non-Contact Seals |
| maximum rpm (oil): | 28000 rpm |
| row type & fill slot: | Single Row Non-Fill Slot |
| manufacturer catalog: | Click here |
| snap ring included: | Without Snap Ring |
| manufacturer upc number: | 029176016233 |
| internal clearance: | C3 |
Detailed Parameters
parameter：
Similar products
SNR 71919CVUJ74 angular contact ball bearings
With over 10170 full-service stores, our SNR 71919CVUJ74 angular contact ball bearings 65 Bore Diameter (mm) inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity 65x120x23 Size (mm) by saving time and your hard-earned dollars. Size (mm) 65x120x23 Bore Diameter (mm) 65 Outer Diameter (mm) 120
INA EGW14-E40-B plain bearings
INA EGW14-E40-B plain bearings Manufacturers N/A Minimum Buy Quantity , Online 0.0 Inventory Wholesale Suppliers ! Inventory 0.0 Manufacturer Name SKF Minimum Buy Quantity N/A Weight 0.097 Product Group B04144 Rolling Element None Self Aligning No Component Description Shaft Washer Only Thrust Bearing Yes Single or Double Direction Double Direction Banded No Long Description 55MM
Timken 594A/592XE tapered roller bearings
The online Timken 594A/592XE tapered roller bearings parts store gives you immediate access to a selection of more than 1.4 million new, 122 mm overall length: used, remanufactured. overall length: 122 mm lock nut outside diameter: 220 mm thread size: M170x3 lock nut number: KM34 compatible bearing number: 22234, 23134 lock washer number: MB34 d
SNFA VEX 90 /S 7CE3 angular contact ball bearings
Various types and sizes 140 mm d to accommodate your SNFA VEX 90 /S 7CE3 angular contact ball bearings requirements. d 140 mm maximum rpm: 2600 RPM D 190 mm flanges: With Flanges B 50 mm series: NA49 needle bearing type: Machined Bearing with Inner Ring lubrication hole type: Lubrication Groove & Hole closure type: