Timken MJH-981 needle roller bearings
Timken MJH-981 needle roller bearings 3-7/16 in Shaft Size Needs Analysis , Mounted Bearing Engineering Group Manufacturing Service . Get Your Free.
| Engineering Group | Mounted Bearing |
| Shaft Size | 3-7/16 in |
| Shaft Size Type | Imperial |
| Full Timken Part Number | QAP18A307SB |
| Locking Style | Single Concentric |
| Weight | 45 lb |
| Housing Style | Two-Bolt Pillow Block |
| UPC Code | 0883450045407 |
| Dimension A | 3.75 in |
| Dimension B | 7.69 in |
| Dimension C | 5.13 in |
| Dimension D Max | 11.25 in |
| Dimension D Min | 9.38 in |
| Dimension F | 13.50 in |
| Dimension G | 3.410 in |
| Dimension H | 1.88 in |
| Dimension J (Bolt Size) | 0.875 in |
| Dimension KA | 1.44 in |
| Dimension L | 4.3 in |
| Dimension M | 2.59 in |
| Dimension RA | 0.27 in |
| Dimension SA | 4.03 in |
| C0 – Static Load | 87200 lb |
| C – Dynamic Load (Basic) | 79700 lb |
| e – Geometry Factor | 0.23 |
| Y1 – Geometry Factor | 2.90 |
| Y2 – Geometry Factor | 4.31 |
| Oil Lubrication – M/N Seal | 1400 rpm |
| Oil Lubrication – T Seal | 2400 rpm |
| Oil Lubrication – B/C/O Seal | 1000 rpm |
| Grease Lubrication – M/N Seal | 1400 rpm |
| Grease Lubrication – T Seal | 2000 rpm |
| Grease Lubrication – B/C/O Seal | 1000 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0030 in |
| Eng Internal Radial Clearance – Min | 0.0024 |
| Eng Internal Radial Clearance – Max | 0.0039 |
| Pre Install Clearance Min | 0.0024 in |
| Pre Install Clearance Max | 0.0039 in |
Detailed Parameters
parameter：
Similar products
Fersa HM801346X/HM801310 tapered roller bearings
How do you find the Fersa HM801346X/HM801310 tapered roller bearings specification? Manufacturers 35 mm d Online Free check！ d 35 mm precision rating: ABEC 1 D 72 mm finish/coating: Uncoated B 25 mm bearing material: SAE 52100 Steel bore type: Round inner ring width: 25 mm closure type: Two land riding Nitrile "Buna N" rubber
ZEN 3805 angular contact ball bearings
ZEN 3805 angular contact ball bearings Deal 11/16 in D is your source 50000 maximum pv value: for OEM and accessories. 7/16 in d We sell Genuine at discount prices. d 7/16 in maximum pv value: 50000 D 11/16 in maximum p value: Static 8000 / Dynamic 2000 (psi) overall length: 1/2 in maximum v
SNFA VEX 45 /NS 7CE1 angular contact ball bearings
How 2.4375 in d do I place an EMERGENCY order for a SNFA VEX 45 /NS 7CE1 angular contact ball bearings that I want to pick up at a our store? d 2.4375 in D 6.9400 to 7.3100 in overall length: 8.7400 in expansion type: Expansion Unit overall height: 5.5900 in seal type: Clearance/Non-Contact mounting:
LMEFP60 Samick Weight 3.18 Kg Linear bearings
Bearing number LMEFP60 Brand Samick Bore Diameter (mm) 60 Outer Diameter (mm) 90 d 60 mm D 90 mm d1 17.5 mm d2 10.8 mm h 18 mm D1 134 mm H 112 mm L 125 mm PCD 11 mm ℓ 18 Tolerance h14 Tolerance perpendicularity (C) 25 Weight 3.18 Kg Basic dynamic load rating