SKF LUHR 30-2LS linear bearings
Various types and L 865500 Dimension series sizes to accommodate 479.425 mm D your SKF LUHR 30-2LS linear bearings requirements.
| Dimension series | L 865500 |
| d | 381 mm |
| D | 479.425 mm |
| T | 49.213 mm |
| d1 ≈ | 430.9 mm |
| B | 47.625 mm |
| C | 34.925 mm |
| r1,2 min. | 6.4 mm |
| r3,4 min. | 3.3 mm |
| a | 92 mm |
| da max. | 406 mm |
| db min. | 413 mm |
| Da min. | 448 mm |
| Da max. | 462 mm |
| Db min. | 463 mm |
| Ca min. | 6 mm |
| Cb min. | 14 mm |
| ra max. | 6 mm |
| rb max. | 3.1 mm |
| Basic dynamic load rating C | 638 kN |
| Basic static load rating C0 | 1500 kN |
| Fatigue load limit Pu | 120 kN |
| Reference speed | 800 r/min |
| Limiting speed | 1100 r/min |
| Calculation factor e | 0.5 |
| Calculation factor Y | 1.2 |
| Calculation factor Y0 | 0.7 |
| Mass bearing | 20 kg |
Detailed Parameters
parameter：
Similar products
UKIP319+H2319 NACHI N 29 mm Bearing units
Bearing number UKIP319+H2319 Brand NACHI Bore Diameter (mm) 85 Width (mm) 150 d 85 mm A 85 mm B1 90 mm H 150 mm H1 45 mm H2 285 mm J 340 mm L 410 mm N 29 mm Bolt (G) M24
KTSOS12-PP-AS INA C2 56 mm Linear bearings
Bearing number KTSOS12-PP-AS Brand INA Bore Diameter (mm) 12 d 12 mm A6 6.5 mm A/F 2.5 mm H5 6.1 mm H7 11 mm H8 16.5 mm K3 4.3 mm K4 1.6 mm K5 8 mm Thread (K2) M5 Thread (K8) NIP 4 MZ A5 21.5 mm C3 24 mm Angle (?) 66 ° A
R45Z-1 NSK T 19.842 mm 45.23×79.985×19.842mm Tapered roller bearings
Bearing number R45Z-1 Size (mm) 45.23×79.985×19.842 Brand NSK Bore Diameter (mm) 45.23 Outer Diameter (mm) 79.985 Width (mm) 19.842 d 45.23 mm D 79.985 mm T 19.842 mm B 20.638 mm
No Gear Slewing Ring Bearings for Wind Turbine
No Gear Slewing Ring Bearings for Wind Turbine Manufacturers 0.7500 in d , 29800 lbf radial static load capacity: Online 7 ° misalignment angle: Wholesale Suppliers ! d 0.7500 in radial static load capacity: 29800 lbf misalignment angle: 7 ° operating temperature range: Max 250 °F shank thread length: 1.7500 in head diameter: 1.7500 in