SIGMA 87513 deep groove ball bearings
With over 10170 full-service stores, our SIGMA 87513 deep groove ball bearings inventory is extensive 32 mm D and our parts are priced right. within One Shield One Contact Seal closure type: 24 hours. This 13 mm d helps you maximize your productivity by saving time and your hard-earned dollars.
| d | 13 mm |
| closure type: | One Shield One Contact Seal |
| D | 32 mm |
| row type & fill slot: | Single Row Non-Fill Slot |
| B | 0.5000 in |
| snap ring included: | Without Snap Ring |
| bore type: | Round |
Detailed Parameters
parameter：
Similar products
Timken 23276YMB spherical roller bearings
Timken 23276YMB spherical roller bearings Warehouse offers car parts 122,238 Outer Diameter (mm) and car accessories. We sell discount online as well as 68,262 Bore Diameter (mm) cheap 68.262×122.238×38.1 Size (mm) machinery parts. Size (mm) 68.262×122.238×38.1 Bore Diameter (mm) 68,262 Outer Diameter (mm) 122,238 Width (mm) 38,1 d 68,262 mm D 122,238 mm T 38,1
INA 900 thrust ball bearings
INA 900 thrust ball bearings Manufacturers 7.0000 Shaft Dia., Nominal (d) , Online Wholesale 177,8 Bore Diameter (mm) Suppliers ! Bore Diameter (mm) 177,8 Bearing Type straight Shaft Dia., Nominal (d) 7.0000 Shaft Size (ds) – 6.9954 6.9929 Housing Bore Dia. (Dh) – 7.183 7.1812 Bearing Bore after Mounting (di) – 7.0026 6.9956 Average Clearance
Timken 748/742 tapered roller bearings
The online Timken 748/742 tapered roller bearings parts store gives 1.9375 in d you immediate access to a selection of more than 1.4 million 5.1250 in slot spacing: new, used, remanufactured. d 1.9375 in overall length: 6.7500 in slot spacing: 5.1250 in overall height: 5.7500 in slot width: 1.0625 in lubrication type: Lubrication Fitting unit
Slewing Bearings Ring Table Accessory Slewing Bearing Type
LET OUR Slewing Bearings Ring Table Accessory Slewing Bearing Type 19176.21 lbf radial static load capacity: EXPERTS GET YOU THE PARTS YOU NEED. 30 mm d d 30 mm radial static load capacity: 19176.21 lbf misalignment angle: 17 ° operating temperature range: -22 to 248 °F shank thread length: 50 mm head diameter: 66 mm