NTN SC07A42LL deep groove ball bearings
Various types and 22 mm A1 sizes to accommodate 40 mm A your NTN SC07A42LL deep groove ball bearings requirements.
| A | 40 mm |
| A1 | 22 mm |
| B | 34 mm |
| B1 | 43.5 mm |
| d | 17 mm |
| d1 | 32.4 mm |
| Dz | 54 mm |
| E | 13 mm |
| G | M6x1 |
| H | 30.2 mm |
| H1 | 11 mm |
| H2 | 62 mm |
| J | 52 mm |
| L | 76 mm |
| L1 | 22 mm |
| N | M10 |
| s1 | 30.5 mm |
| S | 17 mm |
| Z | 64 mm |
| C | 12.8 kN |
| C0 | 6.65 kN |
| T min. | -20 °C |
| T max. | 100 °C |
| Weight | 0.73 kg |
| Recommended tightening torque for set screw | 5.5 Nm |
| Designation of housing | PA204N- |
| Designation of bearing | EX203G2 |
| Designation of closed end cover | SCCE204 |
| Designation of open end cover | SCOE204-17 |
Detailed Parameters
parameter：
Similar products
241/950-B-K30-MB FAG e 0.36 950x1500x545mm Spherical roller bearings
Bearing number 241/950-B-K30-MB Size (mm) 950x1500x545 Brand FAG Bore Diameter (mm) 950 Outer Diameter (mm) 1500 Width (mm) 545 d 950 mm D 1500 mm B 545 mm D1 1306.7 mm Da max 1452 mm da min 998 mm ds 12.5 mm ns 23.5 mm ra max 10 mm rmin 12 mm m 3777 kg
SKF BT1-8010/HA4 tapered roller bearings
The online SKF BT1-8010/HA4 tapered roller bearings parts store gives you immediate access to a 94113-B Cup Part Number selection of more than 1.4 million new, used, remanufactured. 94000 Series Series 94000 Cone Part Number 94687 Cup Part Number 94113-B Design Units Imperial Bearing Weight 36.1 lb Cage Type Stamped Steel d 6.8750 in D
2279 INA 82.55×114.262×28.575mm Manufacturer URL http://www.ina.com Thrust ball bearings
Bearing number 2279 Size (mm) 82.55×114.262×28.575 Brand INA Bore Diameter (mm) 82.55 Outer Diameter (mm) 114.262 Width (mm) 28.575 d 3 1/4 inch d 82.55 mm D 4.499 inch D 114.262 mm T 1.125 inch T 28.575 mm m 1.94 lbs / Weight m 0.881 kg / Weight Ca 16600 lbf / Dynamic load rating
ZEN SF627 deep groove ball bearings
Various types and sizes 1.1250 in D to 0.5000 in d accommodate your ZEN SF627 deep groove ball bearings requirements. d 0.5000 in precision rating: ABEC 1 (ISO Class Normal) D 1.1250 in finish/coating: Uncoated B 0.3125 in cage material: Steel bore type: Round outer ring width: 7.9 mm closure type: Single Seal fillet radius: