KOYO 6004-2RS deep groove ball bearings
LET 6.75 in Shaft Size OUR KOYO 6004-2RS deep groove ball bearings EXPERTS GET Aluminium Triple Labyrinth Seal Type YOU THE Split Cylindrical Retained Type Bearing Type PARTS YOU NEED.
Shaft Size | 6.75 in |
Seal Type | Aluminium Triple Labyrinth |
Bearing Type | Split Cylindrical Retained Type |
Support Type | Four-Bolt Plummer Block |
Series Type | Light Series |
Pillow/Plummer Block Style | Split Cylindrical Housed Unit – SAFQ |
Bolt Size | 4 x 1-1/4 |
Bearing UPC | 013992104878 |
Dimension H | 7-7/8 in |
Dimension H2 | 16.75 in |
Dimension J1 | 24-3/8 in |
Dimension J2 | 21-5/8 in |
Dimension K | 4-1/2 in |
Dimension L | 28 in |
Dimension M | 7-1/2 in |
Housing Width | 7.9 in |
Cr – Dynamic Load Rating | 117993 lbf |
Cor – Static Load Rating | 186233 lbf |
Maximum Speed | 1220 rpm |
Note | This product line was formerly known as “Revolvo” |
Detailed Parameters
parameter:
Similar products
SNFA VEX 100 /S 7CE1 angular contact ball bearings
Online SNFA VEX 100 /S 7CE1 angular contact ball bearings Expert.More Choices. 62 Outer Diameter (mm) SNFA VEX 100 /S 7CE1 angular contact ball bearings in Stock & Ready 30x62x16 Size (mm) to Ship Now! Size (mm) 30x62x16 Bore Diameter (mm) 30 Outer Diameter (mm) 62 Width (mm) 16 d 30 mm D 62 mm
SKF W 6002-2RZ deep groove ball bearings
Enjoy High 25 Bore Diameter (mm) Margins 25x52x18 Size (mm) on Competitive Pricing.Great Wholesale Products at Low Costs. Size (mm) 25x52x18 Bore Diameter (mm) 25 Outer Diameter (mm) 52 Width (mm) 18 d 25 mm D 52 mm B 18 mm C 18 mm r1 min. 1 mm r2 min. 1 mm Weight 0,16 Kg
NACHI NJ 1018 cylindrical roller bearings
With over 10170 full-service stores, our NACHI NJ 1018 cylindrical roller bearings inventory is extensive and our parts are priced right. within 260 mm d 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. d 260 mm dynamic load capacity: 1675 kN D 400 mm static load capacity: 2550
ESSP205 SNR Weight 1.7 Kg Bearing units
B 21.4 mm A5 13.9 mm d1 37.4 mm G R1/8″ H2 41 mm s1 24.2 mm S 7.5 mm SW 3 mm C 14 kN C0 7.88 kN T min. -20 °C T max. 100 °C Recommended tightening torque for set screw 5.5 Nm Designation of housing SP203-205/52- Designation of bearing ES205G2 Bearing number