FAG NJ2209-E-TVP2 + HJ2209-E cylindrical roller bearings
offers 3GB Dimension series 400 mm D a 220 mm d FAG NJ2209-E-TVP2 + HJ2209-E cylindrical roller bearings selection of Genuine at Wholesale Prices. We are a FAG NJ2209-E-TVP2 + HJ2209-E cylindrical roller bearings Certified Parts Retailer
| Dimension series | 3GB |
| d | 220 mm |
| D | 400 mm |
| T | 72 mm |
| d1 ≈ | 295.99 mm |
| B | 65 mm |
| C | 54 mm |
| r1,2 min. | 5 mm |
| r3,4 min. | 4 mm |
| a | 73.559 mm |
| da max. | 259 mm |
| db min. | 240.5 mm |
| Da min. | 348 mm |
| Da max. | 382.5 mm |
| Db min. | 371 mm |
| Ca min. | 10 mm |
| Cb min. | 18 mm |
| ra max. | 5 mm |
| rb max. | 4 mm |
| Basic dynamic load rating C | 1059 kN |
| Basic static load rating C0 | 1400 kN |
| Fatigue load limit Pu | 127 kN |
| Reference speed | 1200 r/min |
| Limiting speed | 1600 r/min |
| Calculation factor e | 0.43 |
| Calculation factor Y | 1.4 |
| Calculation factor Y0 | 0.8 |
| Mass bearing | 34.4 kg |
Detailed Parameters
parameter：
Similar products
NP898967/NP477660 Timken 25x47x15mm C 11.5 mm Tapered roller bearings
Bearing number NP898967/NP477660 Size (mm) 25x47x15 Brand Timken Bore Diameter (mm) 25 Outer Diameter (mm) 47 Width (mm) 15 d 25 mm D 47 mm T 15 mm B 15 mm C 11.5 mm R 1 mm r 0.8 mm
CYSD 7912DT angular contact ball bearings
CYSD 7912DT angular contact ball bearings Deal is your source for OEM and accessories. We sell Genuine HCS3 series: at discount prices. series: HCS3
SNR R155.22 wheel bearings
The online SNR R155.22 wheel bearings parts store gives you 1100 RPM maximum rpm: immediate access to a selection 240 mm d of 360 mm D more than 1.4 million new, used, remanufactured. d 240 mm maximum rpm: 1100 RPM D 360 mm operating temperature range: Maximum of +212 °F B 92 mm cage type:
29244E NACHI 220x300x48mm Enclosure Open Thrust roller bearings
Bearing number 29244E Size (mm) 220x300x48 Brand NACHI Bore Diameter (mm) 220 Outer Diameter (mm) 300 Width (mm) 48 d 220 mm D 300 mm T 48 mm d1 292 mm r min. 2 mm A 117 mm B1 15 mm B2 45 mm C 24 mm D1 254 mm da min. 260 mm Da