AST NJ217 EM cylindrical roller bearings
Offer High Quality Brand 136.525 mm da AST NJ217 EM cylindrical roller bearings .Contact Us Online to Get Best 289.999 mm Da Quote.
| da | 136.525 mm |
| Da | 289.999 mm |
| Ca | 89.789 mm |
| A1 | 158.75 mm |
| A2 | 225.425 mm |
| S | 4.763 mm |
| ba | 70.644 mm |
| H | 338.137 mm |
| H1 | 169.875 mm |
| H2 | 66.675 mm |
| J min. | 441.325 mm |
| J max. | 488.95 mm |
| J1 | 95.25 mm |
| L | 558.8 mm |
| N1 | 28.575 mm |
| R1 | 104.775 mm |
| R2 | 33.337 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 51.594 mm |
| Housing | SAFS 532 |
| Bearing | 22232 CCK/W33 |
| Adapter sleeve assembly | SNW 32×5.3/8 |
| Stabilizing ring | SR-32-0 |
| Labyrinth ring | 2 x LOR 129 |
| End plug (suffix Y) | EPR 16 |
| Bearing limiting speed | 2800 r/min |
| P60° | 345 kN |
| P90° | 207 kN |
| P120° | 133 kN |
| P150° | 120 kN |
| P180° | 145 kN |
| Pa | 38.5 kN |
| Mass pillow block | 129 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 793.8 g |
Detailed Parameters
parameter：
Similar products
KOYO 47384 tapered roller bearings
LET OUR KOYO 47384 tapered roller bearings EXPERTS Steel bearing material: GET 12.5000 in d YOU THE PARTS YOU NEED. 2.6250 in cone width: d 12.5000 in bearing material: Steel cone width: 2.6250 in finish/coating: Uncoated cage material: Steel manufacturer upc number: 053893563787 abma precision rating: Standard Precision Weight 121.53 lbs
NACHI 32352 tapered roller bearings
NACHI 32352 tapered roller bearings 0.0 Inventory Manufacturers , Online Wholesale Suppliers ! Inventory 0.0 Manufacturer Name NSK Minimum Buy Quantity N/A Weight 0 Product Group B00308 Enclosure Open Precision Class ABEC 1 | ISO P0 Maximum Capacity / Filling Slot No Rolling Element Ball Bearing Snap Ring No Internal Special Features Smaller Inner Ring
EXC216 SNR Basic dynamic load rating (C) 72.5 kN Bearing units
B 74.6 mm A3 2 mm A5 37.3 mm d1 110 mm G M6x1 s1 64.3 mm S 37.3 mm SW 6 mm C 72.5 kN C0 54.2 kN T min. -20 °C T max. 100 °C Recommended tightening torque for set screw 33 Nm Designation of housing C216- Designation of bearing EX216G2 Bearing number
SNR AB41010 deep groove ball bearings
What are the dimensions of a SNR AB41010 deep groove ball bearings? Manufacturing Service . Get 46 Bore Diameter (mm) Your Free, Instant 74 Outer Diameter (mm) Quote！ Bore Diameter (mm) 46 Outer Diameter (mm) 74 Bearing Type thrust washer Shaft Dia., Nominal (d) 46.0000 Bearing Outside Diameter, Nominal(Do) 74.000 Washer Inside Diameter, Nominal (di)