NKE NJ218-E-TVP3+HJ218-E cylindrical roller bearings
Advance NKE NJ218-E-TVP3+HJ218-E cylindrical roller bearings is your source for quality 215.001 mm Da and accessories. shop online for 85.801 mm Ca home delivery or pick up in one of our 10000 . 101.6 mm da
| da | 101.6 mm |
| Da | 215.001 mm |
| Ca | 85.801 mm |
| A1 | 120.65 mm |
| A2 | 254 mm |
| S | 4.763 mm |
| ba | 61.913 mm |
| H | 257.175 mm |
| H1 | 133.35 mm |
| H2 | 53.975 mm |
| J min. | 336.55 mm |
| J max. | 368.3 mm |
| J1 | 69.85 mm |
| L | 419.1 mm |
| N1 | 22.225 mm |
| R1 | 77.787 mm |
| R2 | 30.163 mm |
| RG | 1/2 NPT |
| PG | 1/4 NPT |
| h | 46.831 mm |
| Housing | SAW 524 |
| Bearing | 23224 CCK/W33 |
| Adapter sleeve assembly | SNW 124×4 |
| Stabilizing ring | SR-24-20 |
| Taconite seal | TER 657 |
| End plug (suffix Y) | EPR 14 |
| Max. speed for Taconite seal | 775 r/min |
| P60° | 185 kN |
| P90° | 111 kN |
| P120° | 72.5 kN |
| P150° | 66.7 kN |
| P180° | 81.4 kN |
| Pa | 27.4 kN |
| Mass pillow block | 49.9 kg |
| Cap bolt | 2 x 1-8 UNC |
| Cap bolt recommended tightening torque | 400 N·m |
| Cap bolt, SAE grade | 5 |
| Appropriate attachment bolt size G | 0.75 in |
| Initial grease fill | 379.89 g |
Detailed Parameters
parameter：
Similar products
NTN 82681D/82620/82620D tapered roller bearings
The online NTN 82681D/82620/82620D tapered roller bearings parts store gives you immediate access 290000 Series to a selection of more than 1.4 million new, 291750 Cup Part Number used, EE291176D Cone Part Number remanufactured. Series 290000 Cone Part Number EE291176D Cup Part Number 291750 Design Units Imperial Bearing Weight 120.3 lb Cage Type Stamped Steel
SL01-4948 NTN C 80 mm 240x320x80mm Cylindrical roller bearings
Bearing number SL01-4948 Size (mm) 240x320x80 Brand NTN Bore Diameter (mm) 240 Outer Diameter (mm) 320 Width (mm) 80 d 240 mm D 320 mm B 80 mm C 80 mm r min. 2.1 mm J 272.5 mm K 290.5 mm ℓ 5 Tolerance h14 Da 309 mm ra max. 2 mm da 251 mm
Toyana 7214 B-UO angular contact ball bearings
are a few brands you will find in our inventory. 1.4375 in d Find Toyana 7214 B-UO angular contact ball bearings to see what’s in stock! d 1.4375 in overall height: 4-1/8 in slot spacing: 3.5000 in lubrication type: Cannot Be Relubricated slot width: 0.2500 in dynamic load capacity: 5730 lb unit type: Side Mount
ISO 7056 ADT angular contact ball bearings
With over 10170 25,000 Bore Diameter (mm) full-service stores, 25,000 mm Fw our ISO 7056 ADT angular contact ball bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. Bore Diameter (mm) 25,000 Outer Diameter (mm) 30,000 Fw 25,000