CYSD NU1004 cylindrical roller bearings
CYSD NU1004 cylindrical roller bearings Engineering Calculator , 140 mm da Manufacturing Service . Get Your Free.
| da | 140 mm |
| db | 158.75 mm |
| dc | 134.938 mm |
| Da | 250 mm |
| Ca | 77.8 mm |
| A1 | 149.225 mm |
| A2 | 260.35 mm |
| S | 4.763 mm |
| ba | 61.119 mm |
| H | 298.45 mm |
| H1 | 152.4 mm |
| H2 | 60.325 mm |
| J min. | 406.4 mm |
| J max. | 434.975 mm |
| J1 | 85.725 mm |
| L | 511.175 mm |
| N1 | 28.575 mm |
| R1 | 87.313 mm |
| R2 | 38.1 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 51.594 mm |
| Housing | SAFS 228 |
| Bearing | 22228 CC/W33 |
| Lock nut | AN 28 |
| Lock washer | W 28 |
| Stabilizing ring | SR-28-0 |
| Taconite seal (db shaft position) | TER 144 |
| Taconite seal (dc shaft position) | TER 127 |
| End plug (suffix Y) | EPR 16 |
| Max. speed for Taconite seal | 490 r/min |
| P60° | 301 kN |
| P90° | 180 kN |
| P120° | 116 kN |
| P150° | 105 kN |
| P180° | 127 kN |
| Pa | 82.3 kN |
| Mass pillow block | 85.3 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 481.95 g |
Detailed Parameters
parameter：
Similar products
ISB FC 3652168 cylindrical roller bearings
QuestionISB FC 3652168 cylindrical roller bearings ? Find what you need faster 360 Bore Diameter (mm) by 650 Outer Diameter (mm) entering your information 360x650x95 Size (mm) . Size (mm) 360x650x95 Bore Diameter (mm) 360 Outer Diameter (mm) 650 Width (mm) 95 d 360 mm D 650 mm B 95 mm C 95 mm r
Timken AS7K deep groove ball bearings
The online Timken AS7K deep groove ball bearings parts store gives you immediate access to a SNT 3080F Housing selection of more than 1.4 million new, used, remanufactured. Housing SNT 3080F Bearing 23080K Locating Rings (width x OD) FIXED HOUSING Seal Type Taconite Seal TA80 Adapter Sleeve1 OH3080H Locknut HM3080 Lockwasher MS3080 End Cover2 EC80
TGB35279 SNR 30x152x86mm d 30 mm Angular contact ball bearings
Bearing number TGB35279 Size (mm) 30x152x86 Brand SNR Bore Diameter (mm) 30 Outer Diameter (mm) 152 Width (mm) 86 d 30 mm D 152 mm C 86 mm
24126EAW33 SNR 130x210x80mm H 80.000 mm Thrust roller bearings
Bearing number 24126EAW33 Size (mm) 130x210x80 Brand SNR Bore Diameter (mm) 130.000 Outer Diameter (mm) 210.000 Width (mm) 80.000 d 130.000 mm D 210.000 mm H 80.000 mm