NACHI 5210AN angular contact ball bearings
QuestionNACHI 5210AN angular contact ball bearings ? Find what you need faster 1.2500 in d by entering your Round bore type: information .
| d | 1.2500 in |
| horizontal bolt spacing: | 1-7/8 in |
| bore type: | Round |
| vertical bolt spacing: | 1-1/4 in |
| duty type: | Standard Duty |
| shaft centerline height: | 2-1/16 in |
| mounting type: | Three-Bolt Bracket Style |
| hub diameter: | 3-1/4 in |
| housing material: | PBT Thermoplastic |
| bracket width: | 3 in |
| locking device: | Accu-Loc |
| unit standoff: | 1-45/64 in |
| radial dynamic load capacity: | 4410 lbf |
| bolt size: | 3/8 |
| radial static load capacity: | 2540 lbf |
| lubrication type: | Lubrication Fitting |
| seal type: | Contact with Flinger |
| series: | UEFBL200B |
| length through bore: | 1-9/16 in |
| replacement bearing: | UE206-20 |
Detailed Parameters
parameter：
Similar products
NTN 6308LLH deep groove ball bearings
The online NTN 6308LLH deep groove ball bearings parts store gives Tapped Base mounting: you immediate access to a selection of more than 1.4 35.6 mm B million new, used, remanufactured. mounting: Tapped Base B 35.6 mm d 15 mm radial dynamic load capacity: 1110 kgf bore type: Round radial static load capacity: 540 kgf
ZKLN5090-2RS-2AP INA 50x90x68mm Width 68mm Thrust ball bearings
Bearing number ZKLN5090-2RS-2AP Size (mm) 50x90x68 Brand INA Bore Diameter (mm) 50 Outer Diameter (mm) 90 Width (mm) 68 d 50 mm D 90 mm B 68 mm C 68 mm Angle (?) 60 ° d1 72 mm r min. 0.3 mm r1 min. 0.6 mm da min. 63 mm Da max. 82 mm Weight
Timken SM1010KB deep groove ball bearings
What is the 0.7500 in d best place to buy Timken SM1010KB deep groove ball bearings online? Manufacturing Service . d 0.7500 in radial dynamic load capacity: 2899 lb D 47 mm radial static load capacity: 1482 lb outer ring width: 14.7 mm finish/coating: Uncoated inner ring width: 31.2 mm maximum rpm: 2000 RPM bore
FAG HCB7007-C-T-P4S angular contact ball bearings
are a few brands you will 1-3/8 in D find in our inventory. Find FAG HCB7007-C-T-P4S angular contact ball bearings to see what’s 1-1/8 in d in stock! d 1-1/8 in cage material: Steel D 1-3/8 in maximum rpm: 11000 RPM B 1 in precision rating: Not Rated drawn cup type: Open Ends series: J