SKF 71907 CE/HCP4AL angular contact ball bearings
The online SKF 71907 CE/HCP4AL angular contact ball bearings parts store 30 mm B gives you immediate access to a selection of more than 1.4 million new, used, remanufactured.
| B | 30 mm |
| A | 31 mm |
| A1 | 13 mm |
| A2 | 40 mm |
| d | 28.58 mm |
| Dz | 70 mm |
| e | 18 mm |
| G | M6x1 |
| H | 148 mm |
| J | 117 mm |
| L | 80 mm |
| N | 16mm |
| s1 | 15 mm |
| S | 8 mm |
| Z | 44.4 mm |
| C | 19.5 kN |
| C0 | 11.2 kN |
| T min. | -20 °C |
| T max. | 100 °C |
| Weight | 0.92 kg |
| Recommended tightening torque for set screw | 3.7 Nm |
| Designation of housing | FL206N- |
| Designation of bearing | US206-18G2 |
| Designation of open end cover | SCOU206-18 |
Detailed Parameters
parameter：
Similar products
1216K+H216 Loyal Weight 1.65 Kg 80x140x26mm Self aligning ball bearings
Bearing number 1216K+H216 Size (mm) 80x140x26 Brand CX Bore Diameter (mm) 80 Outer Diameter (mm) 140 Width (mm) 26 d 80 mm d1 70 mm D 140 mm B 26 mm C 26 mm B1 46 mm B2 17 mm Weight 1.65 Kg Basic dynamic load rating (C) 39.7 kN Basic static load rating (C0)
INA GAY107-NPP-B-AS2/V deep groove ball bearings
What is INA GAY107-NPP-B-AS2/V deep groove ball bearings in 25,4 Bore Diameter (mm) mechanical engineering? Manufacturing Service . 1.0000 Shaft Dia., Nominal (d) Upload your CAD file for an instant. Bore Diameter (mm) 25,4 Bearing Type straight Shaft Dia., Nominal (d) 1.0000 Shaft Size (ds) – 0.9991 0.9979 Housing Bore Dia. (Dh) – 1.1255 1.1247
ISO NH213 cylindrical roller bearings
With over 10170 full-service stores, our ISO NH213 cylindrical roller bearings inventory is extensive and our parts are priced right. within 24 50 Bore Diameter (mm) hours. This helps you maximize your productivity by saving time and your hard-earned dollars. Bore Diameter (mm) 50 Outer Diameter (mm) 62 Fw 50 mm D 62 mm D1
21309EAKE4 NSK hidYobi 21309EAKE4 45x100x25mm Spherical roller bearings
Bearing number 21309EAKE4 Size (mm) 45x100x25 Brand NSK Bore Diameter (mm) 45 Outer Diameter (mm) 100 Width (mm) 25 d 45 mm D 100 mm B 25 mm C 25 mm r min. 1.5 mm da min. 54 mm da max 65 mm Da min 89 mm Da max. 91 mm ra max. 1.5 mm