Toyana 7324 B-UX angular contact ball bearings
Toyana 7324 B-UX angular contact ball bearings 33211 Series Manufacturers METRIC Design Units , Online Wholesale Suppliers ! X33211 Cone Part Number
| Series | 33211 |
| Cone Part Number | X33211 |
| Design Units | METRIC |
| Cage Type | Stamped Steel |
| C1 – Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 75200 lbf |
| C90(2) – Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 19500 lbf |
| d | 55.000 mm |
| B – Cone Width | 35.000 mm |
| WPD | 95.1 mm |
| DD | 81.8 mm |
| R – Cone Backface To Clear Radius3 | 2.030 mm |
| da – Cone Frontface Backing Diameter | 62 mm |
| db – Cone Backface Backing Diameter | 68 mm |
| Ab – Cage-Cone Frontface Clearance | 3.3 mm |
| Aa – Cage-Cone Backface Clearance | 2.3 mm |
| a – Effective Center Location4 | -9.7 mm |
| C90 – Dynamic Radial Rating (90 million revolutions)5 | 49800 N |
| C1 – Dynamic Radial Rating (1 million revolutions)6 | 192000 N |
| C0 – Static Radial Rating | 202000 N |
| Ca90 – Dynamic Thrust Rating (90 million revolutions)7 | 34100 N |
| K – Factor8 | 1.46 |
| G1 – Heat Generation Factor (Roller-Raceway) | 59.3 |
| G2 – Heat Generation Factor (Rib-Roller End) | 17.2 |
| Cg – Geometry Factor | 0.101 |
Detailed Parameters
parameter：
Similar products
NKE 7310-BECB-MP angular contact ball bearings
With over 10170 full-service stores, 40 mm A our NKE 7310-BECB-MP angular contact ball bearings inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by 34 mm B saving time and your hard-earned dollars. A 40 mm A1 22 mm B 34 mm B1 43.5 mm
T-HM262749D/HM262710G2+A NTN d 346.075 mm 346.075×488.95×174.625mm Tapered roller bearings
Bearing number T-HM262749D/HM262710G2+A Size (mm) 346.075×488.95×174.625 Brand NTN Bore Diameter (mm) 346.075 Outer Diameter (mm) 488.95 Width (mm) 174.625 d 346.075 mm D 488.95 mm T 174.625 mm
RHP QJL2 angular contact ball bearings
Welcome to the RHP QJL2 angular contact ball bearings 7/8 in d online 1-1/4 in D seller. d 7/8 in groove/plug type: None D 1-1/4 in operating temperature range: Maximum of +250 °F overall length: 3/4 in maximum pv value: 50000 maximum p value: 2000 psi sleeve bearing type: Flanged Bearing maximum v value: 1200
2308EEG15 SNR 40x90x33mm B 33.000 mm Self aligning ball bearings
d1 50.6 mm D1 77.9 mm rs min 1.5 mm e 0.25 Y1 2.52 Y2 3.9 Y0 2.64 Radial clearance class CN Precision class P0 Mass 1.01 kg Dynamic load, C 29.4 kN Static load, C0 9.7 kN Nlim 4.800 rpm Min operating temperature, Tmin -20 °C Max operating temperature, Tmax 120 °C Characteristic cage