NACHI 7028CDT angular contact ball bearings
What are the types of NACHI 7028CDT angular contact ball bearings ? Manufacturing Service . Get Your Free, Instant price, 19x8x6 Size (mm) design review.
| Size (mm) | 19x8x6 |
| Bore Diameter (mm) | 19 |
| Outer Diameter (mm) | 8 |
| Width (mm) | 6 |
| d | 8 mm |
| D | 19 mm |
| B | 6 mm |
| d1 | 11.3 mm |
| d2 | 10.76 mm |
| D1 | 15.7 mm |
| r1,2 – min. | 0.3 mm |
| r3,4 – min. | 0.15 mm |
| a | 6.5 mm |
| da – min. | 10 mm |
| db – min. | 10 mm |
| Da – max. | 17 mm |
| Db – max. | 18.2 mm |
| ra – max. | 0.3 mm |
| rb – max. | 0.15 mm |
| dn | 12.2 mm |
| Basic dynamic load rating – C | 1.7 kN |
| Basic static load rating – C0 | 0.6 kN |
| Fatigue load limit – Pu | 0.026 kN |
| Limiting speed for grease lubrication | 109000 r/min |
| Limiting speed for oil lubrication | 165000 mm/min |
| Ball – Dw | 3.175 mm |
| Ball – z | 9 |
| Gref | 0.09 cm3 |
| Calculation factor – e | 0.68 |
| Calculation factor – Y2 | 1.41 |
| Calculation factor – Y0 | 0.76 |
| Calculation factor – X2 | 0.67 |
| Calculation factor – Y1 | 0.92 |
| Preload class A – GA | 15 N |
| Preload class B – GB | 46 N |
| Preload class C – GC | 91 N |
| Calculation factor – f | 1.02 |
| Calculation factor – f1 | 0.99 |
| Calculation factor – f2A | 1 |
| Calculation factor – f2B | 1.04 |
| Calculation factor – f2C | 1.07 |
| Calculation factor – fHC | 1 |
| Preload class A | 21 N/micron |
| Preload class B | 32 N/micron |
| Preload class C | 41 N/micron |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.15 mm |
| da min. | 10 mm |
| db min. | 10 mm |
| Da max. | 17 mm |
| Db max. | 18.2 mm |
| ra max. | 0.3 mm |
| rb max. | 0.15 mm |
| Basic dynamic load rating C | 1.68 kN |
| Basic static load rating C0 | 0.6 kN |
| Fatigue load limit Pu | 0.026 kN |
| Attainable speed for grease lubrication | 109000 r/min |
| Attainable speed for oil-air lubrication | 165000 r/min |
| Ball diameter Dw | 3.175 mm |
| Number of balls z | 9 |
| Reference grease quantity Gref | 0.09 cm³ |
| Preload class A GA | 15 N |
| Static axial stiffness, preload class A | 21 N/µm |
| Preload class B GB | 46 N |
| Static axial stiffness, preload class B | 32 N/µm |
| Preload class C GC | 91 N |
| Static axial stiffness, preload class C | 41 N/µm |
| Calculation factor f | 1.02 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.04 |
| Calculation factor f2C | 1.07 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.007 kg |
Detailed Parameters
parameter：
Similar products
NSK R 2 deep groove ball bearings
How 20 mm B do you 62 mm D find the NSK R 2 deep groove ball bearings specification? Manufacturers Online Free check！ 30 mm d d 30 mm D 62 mm B 20 mm d2 37.5 mm D1 54.3 mm rs min 1 mm Number of lubrication holes 3 b 4.4 mm k 2
W623-2Z SKF C 4 mm 3x10x4mm Deep groove ball bearings
Bearing number W623-2Z Size (mm) 3x10x4 Brand SKF Bore Diameter (mm) 3 Outer Diameter (mm) 10 Width (mm) 4 d 3 mm D 10 mm B 4 mm C 4 mm d1 – mm d2 4.3 mm r1 min. 4.2 mm r2 min. 4.2 mm D1 8 mm D2 0.15 mm da min. 4.3 mm
SNFA VEB 30 7CE3 angular contact ball bearings
With over 10170 full-service stores, our SNFA VEB 30 7CE3 angular contact ball bearings inventory is extensive and our N/A Minimum Buy Quantity parts are priced right. within 24 hours. This helps you maximize your productivity by 0.0 Inventory saving time and your hard-earned dollars. Inventory 0.0 Manufacturer Name TIMKEN Minimum Buy Quantity N/A Weight
Timken SMN215KB deep groove ball bearings
Browse Timken SMN215KB deep groove ball bearings Categories in the Manufacturers 100 mm d Online Free. including 100 Bore Diameter (mm) 150 Outer Diameter (mm) . Bore Diameter (mm) 100 Outer Diameter (mm) 150 d 100 mm d1 103 mm D 150 mm D1 150 mm T 40,9 mm Weight 2,34 Kg Basic dynamic load