Single-Row Four Point Contact Slewing Ball Bearing with Internal Gear 9I-1b16-0288-0908
Our 40 Bore Diameter (mm) highly-skilled and factory-trained service experts have the resources to help you with all your Single-Row Four Point Contact Slewing Ball Bearing with Internal Gear 9I-1b16-0288-0908 needs – including routine maintenance, major repairs, warranty service, and 40x90x23 Size (mm) equipment 90 Outer Diameter (mm) inspections.
| Size (mm) | 40x90x23 |
| Bore Diameter (mm) | 40 |
| Outer Diameter (mm) | 90 |
| Width (mm) | 23 |
| d | 40 mm |
| D | 90 mm |
| B | 23 mm |
| C | 23 mm |
| Weight | 0,72 Kg |
| Basic dynamic load rating (C) | 33,8 kN |
| Basic static load rating (C0) | 11,2 kN |
| (Grease) Lubrication Speed | 6700 r/min |
Detailed Parameters
parameter：
Similar products
SKF NU 319 ECML thrust ball bearings
Welcome 1/2 in inside diameter: to the SKF NU 319 ECML thrust ball bearings 400 maximum p value: 1 in D online seller. inside diameter: 1/2 in maximum p value: 400 D 1 in maximum v value: 360 thickness: 1/16 in nominal overall length: 1/16 in bearing material: Nylon Weight 0.0016 lb plug type: No
Toyana NJ3196 cylindrical roller bearings
170 Million used Toyana NJ3196 cylindrical roller bearings instantly searchable. Shop 420000 Series our large selection of parts based on brand, price, description, and location. Order the Imperial Design Units with stock … Series 420000 Cone Part Number EE420812X Design Units Imperial Cage Type Stamped Steel C1 – Dynamic Radial Rating (Two-Row, 1 million revolutions)1
2212-K-TVH-C3 FAG 60x110x28mm m 1.03 kg / Weight Self aligning ball bearings
Bearing number 2212-K-TVH-C3 Size (mm) 60x110x28 Brand FAG Bore Diameter (mm) 60 Outer Diameter (mm) 110 Width (mm) 28 d 60 mm D 110 mm B 28 mm D1 98.8 mm Da max 101 mm d1 76.6 mm da min 69 mm ra max 1.5 mm rmin 1.5 mm m 1.03 kg / Weight Cr
W627/5X SKF Limiting speed 85000 r/min 5x9x2.5mm Deep groove ball bearings
Bearing number W627/5X Size (mm) 5x9x2.5 Brand SKF Bore Diameter (mm) 5 Outer Diameter (mm) 9 Width (mm) 2.5 d 5 mm D 9 mm B 2.5 mm C 2.5 mm d1 6 mm d2 – mm r1 min. 0.15 mm r2 min. 0.15 mm D1 7.8 mm D2 – mm da min. 5.9 mm